User Manual
Table Of Contents
- 1 Safety and Regulatory Information
- Document Conventions
- Intended Use and Indications for Use
- Safety and Related Information
- DRX-1 System Product Information
- Disposal Information
- Operating Environment
- 2 Hardware and Operation
- Overview
- CARESTREAM DRX-1 System
- Cautions
- Installing the Hardware
- CARESTREAM DRX-1 System Battery
- Labeling the Detector
- DRX-1 Detector LED
- Positioning the Detector in the Bucky
- Range of Operation
- Wireless Operation
- Tether Operation
- Cleaning the Hardware
- With Each Occurrence of Patient Contact
- System Maintenance
Hardware and Operation
7H8166 2-11
Using Two or More
Detectors
Using two or more detectors in a room makes detector identification even
more important. Make sure that the label on the detector matches the icon on
the Console before exposing the patient. You must use the bar-code scanner
while on the screen to read the bar-code on the detector when moving the
detector to a new room.
IMPORTANT: The system does not automatically select a detector.
Supervise carefully to make sure that the correct detector is
selected.
NOTE: Leave the Wall Stand detector in the Bucky to reduce handling and
assure correct detector selection.
See “Acquiring the Image” on page 3-3 for a description of the Workflow.