User Manual
Table Of Contents
- 1 Safety and Regulatory Information
- Document Conventions
- Intended Use and Indications for Use
- Safety and Related Information
- DRX-1 System Product Information
- Disposal Information
- Operating Environment
- 2 Hardware and Operation
- Overview
- CARESTREAM DRX-1 System
- Cautions
- Installing the Hardware
- CARESTREAM DRX-1 System Battery
- Labeling the Detector
- DRX-1 Detector LED
- Positioning the Detector in the Bucky
- Range of Operation
- Wireless Operation
- Tether Operation
- Cleaning the Hardware
- With Each Occurrence of Patient Contact
- System Maintenance
Hardware and Operation
7H8166 2-17
• No cables have abrasions or damage, particularly in locations where
cables are draped and subject to stress.
Grid Recommendation Artifacts are not visible when the following grids are used.
• 103 line pair/inch low frequency stationary grid
Protective Enclosures When there is a risk of fluids contacting the detector, place the detector in a
protective bag. If you are using a protective enclosure around the detector,
remove the enclosure immediately after use to prevent the detector from
overheating.