Installation Instructions

KODAK RVG 6500 System_User & Installation Guide (SM745)_Ed02 27

Mounting the IPS Aiming Ring on the X-Ray Generator

Before mounting the IPS aiming ring, make sure that:

• You have the necessary tools:

• You have cleaned the X-ray generator tube head with disposable cleaning wipes.

• You have asked the practitioner his preference for the position of the aiming ring on the X-ray

tube head, with the ON/OFF button on the left or right side of the X-ray tube head.

To mount the IPS aiming ring on the X-ray generator tube head, follow these steps:

1 Remove the attachment brackets (A).

2 Remove the back cover.

3 Insert the 4 batteries on the board respecting the polarities.

4 Measure the X-ray tube head diameter to select the appropriate aiming ring holding brackets.

15 mm