Operation Manual

Attaching the presser foot holder
Attaching the presser foot
holder
Attaching the presser foot
Removing the presser foot
Attaching the seam guide
Raise the presser foot clamp
(a).
Attach the presser foot
holder (b) as illustrated.
Lower the presser foot holder
(b) until the cut-out (c) is
directly above the pin "d".
Raise the lever (e).
Lower the presser foot holder
(a) and the presser foot (f)
will engage automatically.
Raise the presser foot.
Raise the lever (e) and the
foot disengages.
Attach the seam guide (g) in
the slot as illustrated.
Adjust according to need for
hems, pleats, etc.
Turn power switch to off
("O") when carrying out
any of the above
operations!
Attention:
7
a
e
b
b
c
d
e
f
a
g