Operation Manual

Patch work
Needle position Stitch width Stitch length
Middle 3~5 1~4
Applique
Needle position Stitch width Stitch length
Middle 1~5 0.5~1
To join two pieces of fabric while
leaving a space between their
edges.
- Fold over the edges of the two
pieces of fabric for the hem and
baste the edges to a thin piece of
paper leaving a small space
between them.
- Stitch along the edge, pulling both
threads slightly when beginning to
sew.
- Use thicker than normal threads
for sewing.
- After sewing, remove the basting
and the paper. Finish by tying
knots on the reverse side at the
beginning and the end of the
seams.
- Set stitch width and length dial as
illustrated.
- Cut out the applique design and
baste it to the fabric.
- Sew slowly around the edge of the
design.
- Trim excess material outside the
stitching. Make sure not to cut any
stitches.
- Remove the basting thread.
- Tie top and bottom thread under
the applique to avoid unraveling.
18