Operation Manual

Connecting machine to power source
Connect the machine to a power
source as illustrated.
Unplug power cord when machine
isnotinuse.
Press main switch for power and
light on. (" l ")
Foot control regulates the sewing
speed.
Consult a qualified electrician if in
doubt as to connect machine to
power source.Unplug power cord
when machine is not in use.
The foot control must be used
with the appliance by 4C-316B
(110-120V area) / 4C-326G
(230V area) / 4C-316C, 4C-326C
(220-240V area) manufactured by
Panasonic Co., Ltd.(TW) or KD-
1902 (110-120V area)/ KD-2902
(220-240V area) manufactured by
ZHEJIANG FOUNDER MOTOR
CORPORATION Ltd. (China)
Attention:
Attention:
Sewing light
Foot control
Polarized attachment plug
Conductor
lntended to be grounded
IMPORTANT NOTICE
If the appliance has a polarized plug (one
blade is wider than the other). To reduce the
risk of electric shock, this plug will fit in a
polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug. If it
still does not fit, contact a qualified electrician.
Do not modify the plug in any way.
4