Operation Manual

6. Hold the thread tail securely in one hand.

7. Press on the foot control or the Start/stop button to start

winding the bobbin.

8. After the bobbin has wound a few turns stop the machine and

cut the thread near the hole of the bobbin. Continue filling

the bobbin until it is full. The motor stops automatically

when the bobbin is full. Stop the machine. Push the bobbin

winder spindle to left.

9. Cut the thread and then remove the bobbin.

Please Note: When the bobbin winder switch is placed on the right, "bobbin winding position", the

machine will not sew and the handwheel will not turn. To start sewing, push the bobbin winder switch

to the left "sewing position".

Winding the bobbin