Operation Manual

00
01 02
03
04
0.0 2.0 3.5 5.0 7.0
0.5 1.0 2.0
3.0
4.5
0.0 1.0 3.0 5.0 7.0
0.5 1.0
2.0
3.0 4.5
Changing the needle position
These setting apply only to patterns 00-04. The pre-set position is
"3.5", center position. When you press the " " stitch width
adjustment button, the needle position will move to the left.
When you press the "+" stitch width adjustment button, the
needle position will move to the right.
–
Changing the stitch length
To shorten the stitch length, press the " " stitch length
adjustment button. For a longer stitch length, press the "+" stitch
length adjustment button.
Generally speaking, the thicker the fabric, thread and needle, the
longer the stitch should be.
–
T
T
Adjusting the stitch width
The maximum zigzag stitch width for zigzag stitching is "7.0";
however, the width can be reduced on any patterns. The width
increases as you press the "+" stitch width adjustment button
from "0.0-7.0".
Adjusting the stitch length
The density of zigzag stitches increase as the setting of stitch
length approaches "0.3".
Neat zigzag stitches are usually achieved at "1.0-2.5".
Closed up zigzag stitches (close together) are referred to as a
satin stitch.
A
30
Zigzag stitches
Straight stitches and needle position
05
06
07 07