Operation Manual

Starting

point

While lightly holding the end of upper thread and

start sewing.

Please Note: Gently feed the fabric by hand.

Before stopping, the machine will automatically

sew a reinforcement stitch after the buttonhole

is sewn.

Pull the buttonhole lever all the way down and

position it behind the bracket on the buttonhole

foot.

Buttonhole stitching

Select the buttonhole stitch.

Adjust the stitch width and the stitch length to the

desired width and density.

Position the fabric under the presser foot with the

front end of the buttonhole mark aligned with the

center line on the buttonhole foot.

Please Note: When you select any

buttonhole pattern, LCD screen will be

demonstrated the figure " ", it is to

remind you to lower the buttonhole lever.

Patterns