Operation Manual

I
3.5
1.5~3.0
42
Zipper insertion
- Baste the zipper opening on the garment.
- Press open the seam allowance. Place the
zipper face down on the seam allowance with
the teeth against the seam line. Baste the zipper
tape.
- Attach the zipper foot. Attach the right side of
the presser foot pin to the holder when sewing
the left side of the zipper.
- Attach the left side of the presser foot pin to the
presser foot holder when sewing the right side
of the zipper.
- Stitch left side of the zipper from top to bottom.
- Stitch across the lower end and right side of
zipper. Remove the basting and press.
Inserting a centered zipper
Attention: Zipper foot should be used for
sewing width center needle position straight
stitch only. It is possible that needle could
hit the presser foot and break when sewing
other patterns.
5mm
00