Operation Manual

05
50
Remove the presser foot holder, and attach the
darning foot to the presser foot holder bar.
The lever (a) should be behind the needle clamp
screw (b). Press the darning foot on firmly from
behind with your index finger and tighten the
screw (c).
Move the drop feed control to " " to lower the
feed dogs.
First sew around the edges of the hole (to secure
the threads). Working from left to right, sew over
the hole in a constant and continuous movement.
Turn the work by 1/4 and sew over the first
stitching moving the work slower over the hole
to separate the threads and not form big gaps
between the threads.
Darning
3.5~5.0
a
b
c
Please Note: Free motion darning is
accomplished without the sewing machine
internal feed system. Movement of the fabric
is controlled by the operator. It is necessary
to coordinate sewing speed and movement of
fabric.
* The Darning/ Embroidery foot accessory is
optional. It is not included with this machine.
Free motion darning, embroidery and monogramming
00
a
b
b
a