Operation Manual

54
Insert the twin needle.
T
Follow the instructions for single-needle threading
using the horizontal spool pin. Thread through the
left needle.
Set the second spool pin (included with the
accessories) into the hole on the top of the
machine. Thread through remaining points,
making certain to omit the thread guide above the
needle and pass thread through the right needle.
2.0~5.0
Before sewing adjust the stitch width, Turn the
handwheel to check the needle clearance, so that
needle does not hit the needle plate.
When sewing with twin needle, always proceed
slowly, and make sure to maintain a low speed to
insure quality stitching.
Twin needle
Thread each needle separately.
Please Note: Make sure that the two threads
used to thread the twin needle are of the same
weight. You can use one or two colors
Please Note: When sewing with twin needle,
always proceed slowly, and make sure to
maintain a low speed to insure quality stitching.
Select a stitch pattern and start to sewing.
Utility and decorative patterns 00-14, 26-99 can
be used.
Sewing result will be a pattern with two parallel
stitch lines.
* The twin needle is optional. It is not include
with the accessories.
Attention: When using twin needles, use
the all purpose foot (T) regardless of what
kind of sewing foot will be carried out.
Use only twin needle assemblies with max.
2mm needle distance.