Operation Manual

25
Zippers and piping
Set the machine as illustrated.
The zip foot can be inserted right or left, depending on which
side of the foot you are going to sew. (1)
To sew past the zip pull, lower the needle into the fabric, raise
the presser foot and push the zip pull behind the presser foot.
Lower the foot and continue to sew.
It is also possible to sew in a length of cord, into a bias strip to
form a 'welt'. (2)
Set stitch length dial between "1" - "4" (according to thickness of
fabric).
1
1
2
2-dial model only