Operation Manual

39
Select the buttonhole stitch. Adjust the stitch
width and the stitch length to the desired
width and density.
Position the fabric under the presser foot so
that the centerline's mark is aligning with the
center of the buttonhole foot.
Lower the buttonhole lever, making sure it is
positioned behind the bracket on the
buttonhole foot, as illustrated.
Please Note: When you select any
buttonhole pattern, the LCD screen will
display the figure " ", to remind you to
lower the buttonhole lever.
While lightly holding the end of upper
thread and start sewing.
4
3
Starting
point
5
BUTTONHOLE SEWING
4
3
5