Operation Manual

* Buttonholes are sewn from the front of the presser foot to the back, as shown.

Buttonhole stitching

Buttonholes are sewn from the front of the

presser foot to the back, as shown.

Raise the presser foot and cut thread. To sew

over same buttonhole, raise the presser foot (will

return to original position).

After sewing the buttonhole stitch, raise the

buttonhole lever until it stops.

Cut the center of the buttonhole being careful not

to cut any stitches on either side. Use a pin as a

stopper at the bar tack so you do not cut too

much.