Operation Manual

Select pattern 23 to get the darning stitch.
Chang the presser foot to the buttonhole foot.
Pull the button holder to rear.
Set the button guide plate on buttonhole foot to
the desired length.
Baste the upper fabric and the under fabric
together. Select the needle position. Lower the
presser foot over the center of the tear.
The size of one darn cycle is variable.
However, the maximum stitch length is 2.6cm (1
inch) and the maximum stitch width is 7mm
(9/32 inch).
a. The length of sewing.
b. The width of sewing.
3.5~7.0
1.0~2.0
40
Darning stitch
Patterns
D
23