Operation Manual

Pass the upper thread down through the
hole in the presser foot.
Pull down the buttonhole lever. The buttonhole
lever is positioned behind the bracket on the
buttonhole foot.
Gently hold the end of the upper thread in your
left hand, and then start sewing.
If the sewing range is too big to sew, then we
suggest you can sew several times (or cross sew)
to get better sewing result.
Darning stitches are sewn from the front of the
presser foot to the back, as shown.
41
Darning stitch
Position the fabric so that the needle is 2mm
(1/16 inch) in front of the area to be darned, and
then lower the presser foot lever.
When lowering the presser
foot, do not push in the front of the presser
foot, otherwise the darning will not be sewn
with the correct size.
Please Note:
23
2mm