Operation Manual

IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic safety precautions should always be followed:
Read all instructions before using this needle felting machine.
1
1. Do not allow this appliance to be used as a toy. Close attention is necessary when the machine
is used by or near children.
2. Use this appliance only for its intended use as described in this manual.
Use only attachments recommended by the manufacturer as contained in this manual.
3. Never operate this appliance if it has a damaged cord or plug, if it is not working properly , if it has
been dropped or damaged, or dropped into water. Return the appliance to the nearest authorized
dealer of service center for examination, repair,electrical or mechanical adjustment.
4. Never operate the appliance with any air openings blocked. Keep ventilation openings of the felting
machine and foot controller free from the accumulation of lint, dust, and loose cloth.
5. Keep fingers away from all moving parts. Special care is required around the felting machine needles.
6. Always use the proper needle plate. The wrong plate can cause the needle to break.
7. Do not use bent needles.
8. Do not pull of push fabric while stitching. It may deflect the needle causing it to break.
9. Switch the sewing machine off "O" when making any adjustments in the needle area.
Such as changing needle, changing needle plate, or changing cloth presser foot, and the like.
WARNING - To reduce the risk of burns, fire, electric shock, or injury to persons.
DANGER - To reduce the the risk of electric shock:
1. The appliance should never be left unattended when plugged in.
2. Always unplug this appliance from the electric outlet immediately after using and before cleaning.
3. Always unplug before re-lamping.
Replace bulb with same type rated 15watts/110 volts in 110V/120V area.
( 15 watts 230 volts in 220V/240V area ).
"Read all instructions before using"