Operation Manual

Layer the cloth/fabric/materials that will be felted

together t create the embellishment. Make sure

that the smaller piece to be felted is on the

correct side of the project. (right or wrong side)

Place the layers to be felted together under the

cloth presser. Lower the cloth presser. Adjust the

height of the cloth presser if you need to at this

time so the project can move freely under the

cloth presser.

When you have finished embellishing, turn the

hand wheel toward you making sure the needles

are completely out of the project. Never remove

the embellished project with the needles in the

project, as the needles can bend or break.

Remove the sewing table by sliding it to the left

and the machine will convert to a free arm. This

will allow you to embellish sleeves, pant legs,

and small areas that are sewn in the round.

This will also give you access to the free arm

door to clean out the lint that has accumulated

from embellishing.

Start Embellishing continued: