Zippers and piping
Set the machine as illustrated.
Dial selector on " ".
The zipper foot can be attached right or left, depending on
which side of the foot you are going to sew. (1)
To sew past the zipper pull, lower the needle into the fabric,
raise the presser foot and push the zipper pull behind the
presser foot. Lower the foot and continue to sew.
It is also possible to sew a length of cord into a bias strip to form
a "welt" or piping.
Set stitch length control between "1" - "4" (according to
thickness of fabric). Change to zipper foot.