Operation Manual

Applique and blindstitch applique
29
Position applique piece on background fabric.
Align needle so that it pierces background fabric along the
outside edge if the applique. Lower presser foot.
If using a blindhem foot, align the lip of the blindhem foot guide
so that it sits directly under the edge of the applique.
You may need to adjust the position of the guide to bring it
closer or further from the edge of the applique, by using the
thumbscrew located at the right of the foot.
Begin sewing following the edge of your applique.
To pivot for curves or corners, leave needle down in fabric on
outside edge of applique, lift foot and pivot.
0
1
2
3
4
S
1