Technical data
Vario II series
Installation
06/10
Operating manual
21
4 Installation
⇒
Lift the label printer out of the box.
⇒ Check the label printer for transport damages.
⇒ Check delivery for completeness.
• Label printer.
• Empty core, mounted on transfer ribbon rewinder.
• Dispenser edge (printers with dispenser option only).
• Power cable.
• Documentation.
• Printer driver CD.
Retain original packaging for subsequent transport.
4.1 Setting up the label printer
CAUTION!
The label printer and the print media can be damaged by
moisture and water.
⇒ Set up the label printer only in a dry place protected
from sprayed water.
⇒ Set up label printer on a level, vibration-free and air draught-free
surface.
⇒ Open cover of label printer.
⇒ Remove foam transportation safeguards near the printhead.
Unpack the label
printer
Scope of delivery