Technical data

Vario II series
Installation
06/10
Operating manual
23
4.4 Initiation of the label printer
After switching on the label printer the main menu appears which
shows the printer type, current date and time.
Insert label material and transfer ribbon (see chapter 5. Loading
media, on page 25).
Start measuring in menu 'Label Measurement' (see chapter 8.3, on
page 58
Press key
to finish measuring.
To enable correct measuring, at least two completed labels have
to be passed through (not for continuous labels).
During measuring the label and gap length small differences can
occur. Therefore the values can be set manually in the menu 'Printer
initialisation/Label and Gap'.