Technical data

Vario II series
Label creation
06/10
Operating manual
39
7.3 1D bar codes
Press key
and the display indicates the following text mask:
Press key
E to access the next field.
Selected values are only accepted if the entry was confirmed with key
.
Press key
and to increase and/or decrease the number of mask
record (number of lines).
Y - Distance from top in mm
It is measured from the upper label margin to the lower left point of the
corresponding line.
H - Height of bar code in mm
min: 5 mm - max: 99 mm
T - Type of bar code
30 Code 39
alphanumeric (capital letters) and - .
SPACE * $ / + %
31
Code 2/5 interleaved
numeric, even number of digits
32
EAN 8
numeric, fix number of 8 digits
33
EAN13
numeric, fix number of 13 digits
34
UPC-A
numeric, fix number of 12 digits
35
UPC-E
numeric, fix number of 8 digits
36
CODABAR
numeric and - : / . + (start/stop sign)
37
Code 128
ASCII font (Code A, B, C)
automatic selection of font
38
EAN ADD ON
EAN 13 + 2 or 5 digits
39
GS1-128 (EAN 128)
ASCII font (Code A, B, C)
automatic selection of font
40
Code 93
alphanumeric (capital letters) and - .
SPACE * $ / + %
41
PZN-Code
7 digits, see Code 39
43
Leitcode
numeric, even number of digits
44
Identcode
numeric, even number of digits
46
Code 39 extended
ASCII font
47
Code 128 A
ASCII font (Code A)
48
Code 128 B
ASCII font (Code B)
49
Pharmacode
numeric, fix number of 9 digits
50
PDF417
2D bar code
51
MAXICODE
2D bar code
52
DataMatrix
2D bar code
53
CODABLOCK F
2D bar code
54
RSS Codes
Composite bar codes
57
QR Code
2D bar code
S - Human readable
0 = without - 1 = with
X - Distance from the right side in mm
It is measured from the right label margin to the lower left point of the
corresponding line.
Mask entry