Technical data

Label creation

Vario II series

Operating manual

06/10

Press key

and the display indicates the following text mask:

Press key

E to access the next field.

Selected values are only accepted if the entry was confirmed with key

Press key

and to increase and/or decrease the number of mask

record (number of lines).

Y - Distance from top in mm

It is measured from upper label margin to lower left point of the

corresponding line.

H - Height of symbol

It is not possible to modify the symbol size and therefore the height of

the symbol is always 0.

T - Type of code

51 = MAXICODE

S - Human readable

0 = MAXICODE has no human readable

X - Distance from right side in mm

It is measured from right label margin to lower left point of the

corresponding line.

P - Proportion symbol number/quantity of symbols

Ratio of the present symbol numbers (in case that several

MAXICODE symbols are onto the same label) to the total number of

defined MAXICODE symbols is indicated (generally for a symbol:

0101).

C - Mode

It is possible to create the MAXICODE in three different modes (mode

2, 3 and 4).

R - Rotation of code

0 = 0 degrees, 1 = 90 degrees, 2 = 180 degrees, 3 = 270 degrees

(see also Rotation of text, code and graphic, on page 53).

Mask entry MAXICODE