Technical data

Options
Vario II series
80
Operating manual
06/10
Press key
to arrive at the next menu item.
Settings for error handling.
Press key
and to change between the different error reactions.
Print stop:
The printer stops after each RFID error (tag could not be
programmed).
Marking:
In case of an error the label is marked with sample.
Ignore:
Errors caused by unsuccessful tag programming are 'ignored'. The
label is printed. However, the error is logged in the RFID statistics.
Press key
and to change between the settings error or number of
attempts.
Press key
and to specify the number of attempts, how often the
RFID unit tries to write on the tag before an error is released or before
the print order is cancelled.
Press key
to arrive at the next menu item.
Setting the sending power of the RFID write/read unit.
Press key
and to change the value.
The adjustment of this value requires more special knowledge of
the used hardware. The indicated value does not have to be
changed normally because it affects the function of the write/read
module. Changing can lead to the fact that RFID tags cannot be
programmed any longer.
Press key to save the current settings permanently.
Press key
to arrive at the next menu item.
Indication of the antenna position inside the used label.
Press key
to arrive at the next menu item.
Statistics indication of the previously programmed tags as well as the
number of faulty tags.
Press key
to reset the counter.