Microscope & Magnifier User Manual
18 05/2008
Image acquisition
Once you have set up your parameter as defined in
the above section, you can acquire a frame image
of your specimen.
• Use one of the Find, Fast, Continuous, or
Single buttons to start the scanning procedure
to acquire an image.
• Scanned images are shown in separate
windows.
• Click on the Stop button to stop the current
scan procedure if necessary.
Select Find for automatic pre-
adjustment of detector gain and
offset.
Select Fast for continuous fast
scanning – useful for finding and
changing the focus.
Select Continuous for
continuous scanning with the
selected scan speed.
Select Single for recording a
single image.
Select Stop for stopping the
current scan procedure.
Image optimization
Choosing Range Indicator
• In the View – Dimensions View Option
Control Block, click inside the color field in the
button under the channel button
(
Fig. 21).
Note: Clicking on the right hand side of the
button leads to a list of colors.
Fig. 20 Image Display
Fig. 21 View Dimensions Control Block