Datasheet

10
Carlo Gavazzi Industri A/S
CA18CAxxBPxIO - IO-Link
CA18CAxxBPxIO ENG26/08/2019
Time delays
Timer mode
For SO1
• Disabled
• Power-ON delay
• Power-OFF delay
• Power-ON delay and Power-OFF
delay
• One-shot leading edge
• One-shot trailing edge
Factory settings: Disabled
For SO2
• Disabled
• Power-ON delay
• Power-OFF delay
• Power-ON delay and Power-OFF
delay
• One-shot leading edge
• One-shot trailing edge
Factory settings: Disabled
Timer scale
For SO1
• [ms]
• [s]
• [min]
Factory settings: ms
For SO2
• [ms]
• [s]
• [min]
Factory settings: ms
Timer value
For SO1
• 0 ... 32 767
Factory settings: 0
For SO2
• 0 ... 32 767
Factory settings: 0
Output Inverter
Output Inverter
For SO1 Pin 4 Black wire:
• N.O.
• N.C.
Factory settings: N.O.
For SO2 Pin 4 Black wire:
• N.O.
• N.C.
Factory settings: N.O.
Sensor Output
Switching Output Stage SO1 and SO2
For SO1 Pin 4 Black wire:
• NPN
• PNP
• Push-Pull
Factory settings: PNP
For SO2 Pin 4 Black wire:
• NPN
• PNP
• Push-Pull
• External input, active high
• External input, active low
• External teach
Factory settings: PNP
Outputs
Rated operational current (I
e
) (I
e
) ≤ 200 mA (Continuous)
OFF-state current (I
r
) ≤ 100 μA
Minimum operational current (I
m
) > 0,5 mA
Voltage drop (U
d
) ≤ 1.0 VDC @ 200 mA DC
Protection Short circuit, reverse polarity, transients
Utilization category
DC-12
Control of resistive loads and solid-
state loads with optical isolation
DC-13 Control of electromagnets
Load capacitance max at (U
e
) 100 nF