Datasheet

Specifications are subject to change without notice (25.06.99) 1
Type Selection
Ordering KeyProduct Description
Proximity Sensors Capacitive
Stainless Steel Housing
Type EC, M30, DC
Capacitive proximity switches
with either sensing distance
16 mm flush mounted or sen-
sing distance 25 mm non-
flush mounted. 4-wire DC out-
put with both make (NO) and
break (NC) switching. M30
stainless steel housing with
2 m PVC cable or plug. Ideal
for use in level and plastic ma-
chinery applications.
Type: Capacitive proximity
switch
Housing diameter (mm)
Rated operating dist. (mm)
Output type
Housing material
Housing type
Connection type
Housing Rated Mounting Ordering no. Ordering no. Ordering no. Ordering no.
diameter operating Transistor NPN/cable Transistor NPN/plug Transistor PNP/cable Transistor PNP/plug
dist. (S
n
)
1)
Make & break Make & break Make & break Make & break
switching switching switching switching
M30 16 mm
Flush (built-in) EC 3016 NPASL EC 3016 NPASL-1 EC 3016 PPASL EC 3016 PPASL-1
M30 25 mm Non-flush EC 3025 NPASL EC 3025 NPASL-1 EC 3025 PPASL EC 3025 PPASL-1
1)
Object: Grounded steel plate
Frequency of operating
cycles (f) 50 Hz
Indication for output ON LED, yellow
Environment
Degree of protection IP 67 (Nema 1, 3, 4, 6, 13)
Temperature
Operating temperature
-25 to +80°C ( -13 to +176°F)
Storage temperature -40 to +85°C (-40 to +185°F)
Housing material
Body Stainless steel (St 304)
Front Grey, polyester
Cable end Polyester
Nuts Nickel plated brass
Connection
Cable Grey, 2 m, 4 x 0.34 mm
2
Oil proof, PVC
Plug (-1) M12 x 1
Cable for plug (-1) CON.1A-series
Weight (incl. nuts) 3016: 140 g
3025: 150 g
Approvals
UL
CE-marking Yes
Specifications
Rated operating dist. (S
n
)
3016: 2 to 16 mm
factory set at 16 mm
3025: 4 to 25 mm
factory set at 25 mm
Sensitivity Adj. multiturn pot.meter
Effective operating dist. (S
r
) 0.9 x S
n
≤ S
r
≤ 1.1 x S
Usable operating dist. (S
u
) 0.8 x S
r
≤ S
n
> 1.2 x S
r
Repeat accuracy (R) ≤ 5%
Hysteresis (H) 3 to 20% of sensing distance
Rated operational volt. (U
B
) 10 to 40 VDC
(ripple included)
Ripple ≤ 10%
Rated operational current (I
e
)
Continuous ≤ 200 mA
No-load supply current (I
o
) ≤ 10 mA (no load)
Voltage drop (U
d
) ≤ 2.5 VDC at max. load
Protection Reverse polarity,
short-circuit, transients
EC 3025 PPA S L-1
TRIPLESHIELD
™
• Featuring TRIPLESHIELD ™ sensor protection
• Adjustable sensing distance 2-16 mm or 4-25 mm
• Rated operational voltage: 10-40 VDC
• Output: DC 200 mA, NPN or PNP
• Make and break switching function
• LED indication
• High noise immunity
• Flush and non-flush types
• Plug and cable versions available
• AC versions in the same housing