Datasheet

Specifications are subject to change without notice (25.06.99) 1
Rated operating dist. (S
n
)
3016: 2 to 16 mm
factory set at 16 mm
3025: 4 to 25 mm
factory set at 25 mm
Sensitivity Adj. multiturn pot.meter
Effective operating dist. (S
r
) 0.9 x S
n
≤ S
r
≤ 1.1 x S
Usable operating dist. (S
u
) 0.8 x S
r
≤ S
n
> 1.2 x S
r
Repeat accuracy (R) ≤ 5%
Hysteresis (H) 4 to 20% of sensing distance
Rated operational volt. (U
B
) 20 to 250 VAC
(ripple included)
Ripple ≤ 10%
Rated operational current (I
e
)
Continuous ≤ 500 mA
Short-time < 2.5 A (max. 20 ms)
Min. load current ≤ 10 mA
OFF-state current (I
r
) < 2.5 mA (@ 240 VAC)
1.7 mA (@ 120 VAC)
Voltage drop (U
d
) ≤ 10 VAC (at loads ≥ 20 mA)
Protection Transients
Power ON delay ≤ 100 ms
Frequency of operating
cycles (f) 10 Hz
Indication for output ON LED, yellow
Environment
Degree of protection IP 67 (Nema 1, 3, 4, 6, 13)
Temperature
Operating temperature
-25° to +80°C ( -13° to +176°F)
Storage temperature -40° to +85°C (-40° to +185°F)
Housing material
Body Stainless steel (St 304)
Front Grey, polyester
Cable end Polyester
Nuts Nickel plated brass
Connection
Cable Grey, 2 m, 2 x 0.5 mm
2
Oil proof, PVC
Plug (-6) M12 x 1 double keyed
Cable for plug (-6) CON.-6A-series
Weight (incl. nuts) 3016: 140 g
3025: 150 g
Approvals
UL
CE-marking Yes
Housing Rated Mounting Ordering no. Ordering no.
diameter operating SCR, cable SCR, plug
dist. (S
n
)
1)
Make & break switching Make & break switching
M30 16 mm Flush (built-in) EC 3016 TBASL EC 3016 TBASL-6
M30 25 mm Non-flush EC 3025 TBASL EC 3025 TBASL-6
1)
Object: Grounded steel plate
Ordering KeyProduct Description
Proximity Sensors Capacitive
Stainless Steel Housing
Type EC, M 30, AC
• Featuring TRIPLESHIELD ™ sensor protection
• Adjustable sensing distance 2-16 mm or 4-25 mm
• Rated operational voltage: 20-250 VAC
• Output: SCR
• Make and break switching function
• LED indication
• High noise immunity
• Flush and non-flush types
• Plug and cable versions available
• DC versions in the same housing
Type: Capacitive proximity
switch
Housing diameter (mm)
Rated operating dist. (mm)
Output type
Housing material
Housing type
Connection type
Type Selection
Capacitive proximity switches
with either sensing distance
16 mm flush mounted or 25
mm sensing distance non-
flush mounted. 2-wire AC
output with a switch for
choosing NO and NC
switching. M30 stainless
steel housing with 2 m PVC
cable or plug. Ideal for use
in level and plastic machin-
ery applications. Both types
are available in polyester
housings.
Specifications
TRIPLESHIELD
™
EC 3025 TBA S L-6