Datasheet

Specifications are subject to change without notice (06.06.05) 3
Installation Hints
Relief of cable strain
Protection of the sensing face Switch mounted on mobile carrierTo avoid interference from inductive voltage/
current peaks, separate the prox. switch pow-
er cables from any other power cables, e.g.
motor, contactor or solenoid cables
Incorrect
Correct
The cable should not be pulled
A proximity switch should not serve as
mechanical stop
Any repetitive flexing of the
cable should be avoided
I
A, DC, M12, M18 and M30, 2-wire
Power Supplies
Power supplies VDC: > SS 130/140.