Datasheet

ManualsBrandsCarlo Gavazzi ManualsInductive SensorsInductive Sensor with IO-Link 15mm NPN/PNP/Push-Pull 200mA

Carlo Gavazzi Automation S.p.A.

ICB12, ICB18 & ICB30 IO-Link 3-wire DC

ICB12, ICB18 & ICB30 IO-Link 3-wire DC DS EN21/05/2018

New generation inductive proximity sensors with IO-Link communication

Description

The new generation ICB series is a complete

family of high performance inductive sensors for

contactless and wear free detection of metallic

objects in industrial automation applications, such

as packaging, materials handling and machine

tools. The advanced electronics is enclosed in a

robust nickel-plated brass housing. It is available

in three diameters: M12, M18 and M30 with an

extended sensing distance range between 4 and

22 mm.

On-board IO-Link communication opens up many

possibilities, such as easy conguration and set-

up of the devices and advanced parameter setting.

Benets

• A complete family. Available in M12, M18 and M30

robust nickel-plated brass housings with an operating

distance of 4 to 22 mm.

• Less machine downtime. Lower risk of mechanical

damage thanks to the extended operating distance.

• Easy to install. ICB sensors have a milled section for

wrench grip and two di󰀨erent thread lengths. The user

can choose between 2 m PVC cable and M12-disconnect

plug versions.

• High precision. The onboard advanced microcontroller

ensures better stability with respect to environmental

inuences, with highly reliable repeatable measurements

between -25 and +70°C.

• Easy customization to specic OEM requests:

di󰀨erent cable lengths and materials, special labelling,

customized pig-tail solutions with special cables and

connectors are possible on request.

• The output can be operated either as a switching output

or in IO-Link mode.

• Fully congurable via IO-Link v1.1. Electrical outputs

can be congured as PNP/NPN/Push-pull, normally

open or normally closed.

• Timer functions can be set, such as switch-on and

switch-o󰀨 delay

• Adjustable sensing distance and hysteresis: sensing

distance can be set to 33%, 50%, 75% or 100% of the

maximum sensing distance

• Temperature monitoring: over or under-run temperature

alarms can be set

•

Applications

• Non contact detection of metal objects in general position-sensing and presence-sensing in industrial applications

• Particularly suitable for rotational speed monitoring thanks to the high operating frequency

Summary of content (18 pages)

PAGE 1
ICB12, ICB18 & ICB30 IO-Link 3-wire DC New generation inductive proximity sensors with IO-Link communication Benefits Description The new generation ICB series is a complete family of high performance inductive sensors for contactless and wear free detection of metallic objects in industrial automation applications, such as packaging, materials handling and machine tools. The advanced electronics is enclosed in a robust nickel-plated brass housing.
PAGE 2
ICB12, ICB18 & ICB30 IO-Link 3-wire DC Main functions • • • • Integrated diagnostic function with flashing LED in the event of a short circuit or overload The devices can be operated in IO-Link mode once connected to an IO-Link master, or in standard I/O mode. In IO-Link mode the switching signals of the sensor are made available in the process data via the IO-Link interface.
PAGE 3
ICB12, ICB18 & ICB30 IO-Link 3-wire DC Selection guide ICB12 Connection Cable Plug Cable Plug Cable Plug Cable Plug Body style Short Long Detection principle Rated operating distance Sn Output type Ordering no.
PAGE 4
ICB12, ICB18 & ICB30 IO-Link 3-wire DC Structure ICB12 A B C E D A B C A D B C D E Element A B C Component Sensing face 2 nuts Milled section D LED E M12 x 1, 4 pin, male connector Function Flush or non-flush For sensor mounting For wrench grip Green and Yellow LED: Output flashing: short circuit or overload indication For plug versions only ICB18 A B C D E A B C D A B C D E Element A B C Component Sensing face 2 nuts Milled section D LED E M12 x 1, 4 pin, male connec
PAGE 5
ICB12, ICB18 & ICB30 IO-Link 3-wire DC ICB30 A C B D A B C A B C D Element A B Component Sensing face 2 nuts C LED D M12 x 1, 4 pin, male connector 21/05/2018 ICB12, ICB18 & ICB30 IO-Link 3-wire DC DS EN Function Flush or non-flush For sensor mounting Green and Yellow LED: Output flashing: short circuit or overload indication For plug versions only Carlo Gavazzi Automation S.p.A.
PAGE 6
ICB12, ICB18 & ICB30 IO-Link 3-wire DC Sensing Detection Rated operating distance Sn 4 to 22 mm: depending on housing diameter and version (flush or non-flush) The operating distance is measured according to IEC 60947-5-2, using a standard target moving axially. This target is square shape 1 mm thickness, made of steel e.g. type Fe 360 as defined in ISO 630 and it shall be of the rolled finish.
PAGE 7
ICB12, ICB18 & ICB30 IO-Link 3-wire DC Distance [Inches] 0,12 0,2 0,28 0,36 0,44 0,52 -8 0,21 0,36 0,51 0,66 0,81 -0,38 T S 0 -0,76 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Distance [mm] Fig. 5 M30 Flush 0,35 -0,35 -0,7 -1,05 -30 -6 -4 -2 0,7 0 -10 -20 -16 1,4 1,05 10 [mm] 0 0,06 20 [Inches] [mm] S -0,09 30 0,38 T 8 -24 -0,24 0,76 16 0 Distance [Inches] 0,6 [Inches] -0,04 0,04 24 0 2 4 6 8 10 12 14 16 18 20 22 -1,4 Distance [mm] Fig.
PAGE 8
ICB12, ICB18 & ICB30 IO-Link 3-wire DC Features Power Supply Rated operational voltage (Ub) Ripple (Urpp) No load supply current (Io) Power ON delay (tv) 10 to 36 VDC (ripple included) ≤ 10% ≤ 20 mA ≤ 50 ms Outputs Output functions Output configuration Output current (Ie) OFF-state current (Ir) (only for PNP or NPN output) Voltage drop (Ud) Protection Voltage transient Configurable via IO-Link: PNP, NPN or push-pull Factory setting: PNP Configurable via IO-Link: N.O. or N.C. Factory setting: N.O.
PAGE 9
ICB12, ICB18 & ICB30 IO-Link 3-wire DC IO-Link mode: Yellow LED OFF / ON Blinking Disabled Output SIO f: 2 Hz f: 1 Hz - Description Shows SIO status if no short circuit or temperature errors. Short-circuit or overload Temperature alarm (if enabled) Possibility to disable the LED Green LED: • LED is ON for 0.75 s and OFF for 0.
PAGE 10
ICB12, ICB18 & ICB30 IO-Link 3-wire DC Mechanical data Weight (including 2 nuts and the packaging) max. Mounting Material Max tightening torque Cable version: short, flush: 76.2g; short, non-flush: 76.8g; long, flush: 82.2g; long, non-flush: 82.8g; M12 Plug version: short, flush: 29.5g; short, non-flush: 30.1g; long, flush: 35.2g; long, non-flush: 35.8g. Cable version: short, flush: 100.3g; short, non-flush: 102.8g; long, flush: 112.6g; long, non-flush: 115.1g; M18 Plug version: short, flush: 57.
PAGE 11
ICB12, ICB18 & ICB30 IO-Link 3-wire DC Connection Diagrams + 1 BN 4 BK 4 BK 3 BU 3 BU - Fig. 8 NPN - Normally open 1 BN + 1 BN - Fig. 9 NPN - Normally closed + 1 BN + 4 BK 4 BK 3 BU 3 BU - Fig. 10 PNP - Normally open - Fig. 11 PNP - Normally closed 1 BN 4 BK 3 BU + Out/IO-Link - Fig. 12 IO-Link BN: brown Colour code BK: black BU: blue Wire colors in accordance with EN 60947-5-2 21/05/2018 ICB12, ICB18 & ICB30 IO-Link 3-wire DC DS EN Carlo Gavazzi Automation S.p.A.
PAGE 12
ICB12, ICB18 & ICB30 IO-Link 3-wire DC Dimensions [mm] ICB12 [mm] 4 SW17 7.5 30 32 M12x1 2x lock washer Fig. 13 Short body, flush version, cable 4 1 33.2 4 SW17 4 Fig. 14 Short body, non-flush version, cable 4 1 3 2 33.2 Ø3 LEDx4 4 2x lock washer 54.2 Fig. 16 Short body, non-flush version, plug 4 SW17 50 52 LED 7.5 Ø4.1 7.5 2x lock washer Fig. 17 Long body, flush version, cable 4 1 4 3 2 4 1 4 11.1 70.2 Fig.
PAGE 13
ICB12, ICB18 & ICB30 IO-Link 3-wire DC ICB18 [mm] 4 SW24 7.5 7.5 2x lock washer 30 32 42 Fig. 21 Short body, flush version, cable 4 36.5 10 4 1 SW24 30 Fig. 22 Short body, non-flush version, cable 3 2 4 Ø3 LEDx4 4 1 36.5 SW24 Ø3 LEDx4 8 2x lock washer 7.5 11 SW24 4 SW24 M18x1 LED 7.5 Ø4.1 M18x1 7.5 2x lock washer 50 52 Fig. 25 Long body, flush version, cable 4 1 56.5 SW24 64 Fig. 24 Short body, non-flush version, plug LED 4 30 10 54 Fig.
PAGE 14
ICB12, ICB18 & ICB30 IO-Link 3-wire DC ICB30 [mm] 5 5 SW36 M30x1.5 LED 2x lock washer 30 32 Fig. 29 Short body, flush version, cable SW36 44 30 Fig. 30 Short body, non-flush version, cable 4 1 3 2 5 37.5 SW36 4 1 3 2 Ø3 LEDx4 Ø3 LEDx4 8 8 M12x1 M12x1 37.5 M30x1.5 5 12 M30x1.5 2x lock washer Ø5.2 Ø5.2 M30x1.5 LED SW36 9 30 2x lock washer 55 Fig. 31 Short body, flush version, plug 30 5 LED SW36 LED 50 52 Fig.
PAGE 15
ICB12, ICB18 & ICB30 IO-Link 3-wire DC 5 4 1 57.5 SW36 3 2 5 50 9 2x lock washer 75 Fig. 35 Long body, flush version, plug 21/05/2018 ICB12, ICB18 & ICB30 IO-Link 3-wire DC DS EN 3 2 8 9 2x lock washer 4 1 Ø3 LEDx4 M30x1.5 M30x1.5 8 M12x1 Ø3 LEDx4 57.5 SW36 M12x1 12 50 87 Fig. 36 Long body, non-flush version, plug Carlo Gavazzi Automation S.p.A.
PAGE 16
ICB12, ICB18 & ICB30 IO-Link 3-wire DC Installation M12, M18 and M30 flush d ≥ 3 x Sn d d d ** Fig. 37 Flush sensor, when installed in damping material Fig. 38 Flush sensors, when installed together in damping material M12 and M18 non-flush ≥ 2 x Sn ≥ 3 x Sn ≥3xd d ** Fig. 39 Non-flush sensor, when installed in damping material 21/05/2018 ICB12, ICB18 & ICB30 IO-Link 3-wire DC DS EN d d 2xd d d Fig.
PAGE 17
ICB12, ICB18 & ICB30 IO-Link 3-wire DC M30 non-flush ≥ 2 x Sn ≥ 3 x Sn ≥4xd d d ** Fig. 41 Non-flush sensor, when installed in damping material d 4xd d d Fig. 42 Non-flush sensor, when installed together in damping material Sensors installed opposite each other ≥ 6 x Sn Fig.
PAGE 18
ICB12, ICB18 & ICB30 IO-Link 3-wire DC Delivery contents and compatible components Delivery contents • • • • Inductive proximity switch 2 fixing nuts 2 lock washers Packaging: plastic bag CARLO GAVAZZI compatible components • Mounting bracket AMB8... to be purchased separately • Connector type: CONB1... series to be purchased separately Further reading Information IO-Link manual Mounting brackets Connectors Where to find it QR http://www.productselection.net/MANUALS/UK/IOL_IM.pdf http://www.