Datasheet

8
Carlo Gavazzi Automation S.p.A.
ICB12, ICB18 & ICB30 IO-Link 3-wire DC
ICB12, ICB18 & ICB30 IO-Link 3-wire DC DS EN21/05/2018
Features
Power Supply
Rated operational voltage (U
b
) 10 to 36 VDC (ripple included)
Ripple (U
rpp
) ≤ 10%
No load supply current (I
o
) ≤ 20 mA
Power ON delay (t
v
) ≤ 50 ms
Outputs
Output functions
Congurable via IO-Link: PNP, NPN or push-pull
Factory setting: PNP
Output conguration
Congurable via IO-Link: N.O. or N.C.
Factory setting: N.O.
Output current (I
e
) ≤ 200 mA
OFF-state current (I
r
)
(only for PNP or NPN output)
≤ 100 μA
Voltage drop (U
d
) Max. 2.5 VDC @ 200 mA
Protection Short-circuit, reverse polarity and transients
Voltage transient 1 kV/0.5 J
Response times
Operating frequency (f)
≤ 2 kHz ICB12
≤ 1.5 kHz ICB18
≤ 1 kHz ICB30
Indication
Standard IO mode:
Yellow LED Output Description
OFF OFF
N.O. output, target not present
N.C. output, target present
ON ON
N.O. output, target present
N.C. output, target not present
Blinking
f: 2Hz Short-circuit or overload
f: 1Hz Temperature alarm (if enabled)
Green LED Output Description
OFF - Sensor is not operational
ON - Sensor is operational