Installation Instructions

ManualsBrandsCARLO GAVAZZI ManualsElectronicsSmart Dupline Flat Wireless Switch Model No. SHE5XWLS4WFT

Carlo Gavazzi Controls S.p.A.

SHE5XWLS4xFx

SHE5XWLS4xFx DS ENG14/12/2018

Wireless at switches

Description

The SHE5XWLS4xxx is a wireless light switch with

4 buttons and 4 LED outputs.

It can be mounted with the Elko and Gira frames.

This light switch is part of the smart Dupline

concept for building automation applications and

can be used to control lights, roller blinds and all

other functions supported by the smart Dupline

controller.

It is fully programmable via the Sx tool and must

always be coupled to a SH2WBU230N module.

Benets

• No wires. Wireless switch for any commercial or

residential application.

• Fast and easy installation. Can be placed anywhere,

no need for drilling.

• Improved energy saving. Stand-by mode to reduce

battery consumption.

• Small impact on the wall. Flat design.

• Battery level indication. Red and blue LEDs.

• Two products in one. Temperature sensor is integrated,

thus providing climate control functions.

Applications

Home and building automation.

Main features

• Wireless transmission based on IEEE 802.15.4, at 2.4GHz.

• Transmission range: 100 m free air.

• Temperature measurement: -10° to +50°C.

• It can be used to control any function in the smart Dupline system.

• Up to 250 SHE5XWLS4xxx can be connected to one SH2WBU230N.

Summary of content (5 pages)

PAGE 1
SHE5XWLS4xFx Wireless flat switches Benefits • No wires. Wireless switch for any commercial or residential application. • Fast and easy installation. Can be placed anywhere, no need for drilling. • Improved energy saving. Stand-by mode to reduce battery consumption. • Small impact on the wall. Flat design. • Battery level indication. Red and blue LEDs. • Two products in one. Temperature sensor is integrated, thus providing climate control functions.
PAGE 2
SHE5XWLS4xFx Structure A B C D E F Element A B C Component Back cover Spacer Switch board D Red and blue LEDs E F Push buttons Front cover 14/12/2018 SHE5XWLS4xFx DS ENG Function To be used on glass walls to have a nice aesthetic on the back To be used to place the switch board at a proper high Electronic keypad Red LED: if the battery level is good, the red LED is OFF. It flashes when the relevant button is pressed. Blue LED: if the battery level is low, the blue LED is off.
PAGE 3
SHE5XWLS4xFx Features General Material Dimensions Weight Protection grade Pollution degree Back part: plastic Push button covers: plastic, white or black 55 x 55 x 12 mm (L x H x D) 50 g IP20 3 (IEC 60664) .0 55.0 12 55 .
PAGE 4
SHE5XWLS4xFx Power Supply Power Supply By battery, lithium button 2450 3V WiDup specification Bus Frequency Diagnostics Network topology Antenna Transmission power Sensitivity Number of slave nodes Transmission range Addressing 14/12/2018 SHE5XWLS4xFx DS ENG Wireless Dupline IEEE 802.15.4, @ 2.4 Ghz for Europe, America and China 1. Field strength 2. Network activites 3. Devices’ presence Star with max three wireless repeaters Internal According to IEEE 802.15.4 According to IEEE 802.15.
PAGE 5
SHE5XWLS4xFx References Further reading Information Sx2WEB installation guide Sx2WEB software manual Sx2WEB wireless installation manual Document System manual Where to find it www.productselection.net/MANUALS/UK/system_manual.pdf Sx tool manual www.productselection.net/MANUALS/UK/sx_tool_manual.pdf Wireless manual http://www.productselection.net/MANUALS/UK/wireless_manual.