Datasheet
Specifications are subject to change without notice (09.12.2008) 1
Product Description
The PD30CNT15 sensor fam-
ily comes in a compact 10 x
30 x 20 mm reinforced
PMMA/ABS housing.
The sensors are useful in
applications where high-
accuracy detection as well as
small size is required.
Compact housing and high
power LED for excellent per-
formance-size ratio.
The Teach-In function for
adjustment of the sensitivity
makes the sensors highly
flexible. The output type is
preset (NPN or PNP), and the
output switching function is
programmable (NO or NC).
The mute function can be
used for testing the sensor
for: Malfunctioning, discon-
nection, optical axis adjust-
ment, dusty and dirty lenses.
• Miniature sensor range
• Range: 15 m
• Sensitivity adjustment by Teach-In programming
•
Modulated, Infraredred light 880 nm
• Supply voltage: 10 to 30 VDC
• Output: 100 mA, NPN or PNP preset
• Make and break switching function programmable
• LED indication for output, stability and power ON
• Protection: reverse polarity, short circuit and transients
• Cable and plug versions
• Excellent EMC performance
• Mute function (Sensor blanking) Emitter
•
Remote teach - Receiver
Photoelectrics
Through-beam
Type PD30CNT15....MU/RT
Type Selection
Housing Range Connection Ordering no. Ordering no. Ordering no. Ordering no.
W x H x D S
n
NPN NPN PNP PNP
Emitter Make or break switching Emitter Make or break switching
10 x 30 x 20 mm 15 m Cable PD 30 CNT 15 NMU PD 30 CNT 15 NPRT PD 30 CNT 15 PMU PD 30 CNT 15 PPRT
10 x 30 x 20 mm 15 m Plug PD 30 CNT 15 NM5MU PD 30 CNT 15 NPM5RT PD 30 CNT 15 PM5MU PD 30 CNT 15 PPM5RT
Specifications Emitter
Rated operational volt. (U
B
) 10 to 30 VDC
Ripple (U
rpp
) ≤ 10%
Supply current ≤ 25 mA
Light Source
GaAIAs, LED, 880 nm
Optical angle ± 2º at ½ range
Light type
Infrared, modulated
Light spot
110 mm @ 1.5 m
Adjustable range 1.5 m to 15 m
resolution 3% on distance
Output current
Continuous (I
e
) ≤ 100 mA
Short-time (I) ≤ 100 mA
(max. load capacity 100 nF)
No load supply current (I
o
) ≤ 30 mA
Minimum operational current (I
m
)
0.5 mA
OFF-state current (I
r
) ≤ 100 µA
Voltage drop (U
d
) ≤ 2.5 VDC @ 100 mA
Ordering Key
Type
Housing style
Housing size
Housing material
Housing length
Detection principle
Sensing distance
Output type
Output configuration
Connection type
Mute
PD30CNT15NPM5RT
Note: Emitter, Receiver and Connector to be ordered seperately.
Specifications Receiver
Rated operating distance (S
n
) 15 m, with PD30CNT15
Emitter
Blind zone None
Sensitivity Adjustable by Teach-In
(push button or wire)
Temperature drift ≤ 0.3%/ºC
Hysteresis (H)
(differential travel) ≤ 10%
Rated operational volt. (U
B
) 10 to 30 VDC
Ripple (U
rpp
) ≤ 10%
Protection
Reverse polarity, transients
Indication function
Power supply ON LED, green
Mute function
Emitter off 0 to 3 sec 0 to 2.5 VDC (NPN)
5 to 30 VDC (PNP)
Emitter half power > 3 sec 0 to 2.5 VDC (NPN)
5 to 30 VDC (PNP)