Datasheet

4 Specifications are subject to change without notice (09.12.2008)
Delivery Contents
• Photoelectric switch: PD 30 CNT 15 ...
• Installation instruction
• Mountingbracket APD30-1
• Packaging: Cardboard box
> 100 mm
Incorrect
Correct
T
o avoid interference from inductive voltage /
c
urrent peaks, separate the proximity switch
c
ables from any other power cables. E.g.
Engine, contactor or solenoid cables
Correct
Incorrect
Incorrect
Correct
The cable should not be pulled
A proximity switch should not serve
as mechanical stop
Any repetitive flexing of the
c
able should be avoided
R
elief of the cable strain Protection of the sensing face Sensor mounted on a mobile carrier
Installation Hints
Accessories
• Mounting bracket APD30-2 to be purchased seperately
• Connector type CONG 5A../CON. 54NF.. series.
PD30CNT15....MU/RT