Datasheet

ManualsBrandsCarlo Gavazzi ManualsRelaysSolid State Relay, 20A, 240V, Zero Cross Switching

Solid State Relay

Number of poles

Switching Mode

Rated Operational Voltage

Control voltage

Rated Operational current

Connection type for control

Connection type for power

Connection configuration

Option

Specifications are subject to change without notice (30.06.2011) 1

• Product Width ranging from 17.5mm up to 70mm

• Rated Operational voltage: Up to 600VAC

•

Rated Operational current: Up to 85AAC @ 40°C

• Up to 6600A²s for I²t and 1200Vp blocking voltage

• Control voltages: 3-32 VDC, 20-275 VAC (24-190 VDC)

• IP20 protection

• Design according to EN/IEC60947-4-2, EN/IEC60947-4-3,

EN/IEC62314, UL508, CSA 22-2 No. 14-10

• Integrated voltage transient protection with varistor

• RoHS compliant

• Short circuit current rating: 100kA

• VDE approval

• Germanischer Lloyd approval

Product Description

Ordering Key

This new range of solid state

contactors presents a unique

opportunity to maximize effi-

ciency in panel space and is an

evolution of solid state switch-

es for which Carlo Gavazzi is

very well known.

The nominal current ratings

are at 40˚C. The smallest

width is 17.5mm and is rated

at 20 AAC. Power and control

teminals allow for safe looping

of cables.

Solid State Relays

Zero Switching

Types RGC Solid State Contactor 'E' Connection

RGC 1 A 60 A 30 K K E _

oltage transient protection is standard across the output with a varistor.

pecifications are stated at 25°C unless otherwise noted.

1. Germanischer Lloyd approval applicable only to models RGC1....15.KE,

RGC1...20.KE and RGC1....30.KE

Ordering Key

1Phase SSR Rated Voltage Control Voltage Rated Connection Connection Connection

with heatsink Current

Control Power Configuration Option

RGC1A: ZC 23: 230V +10% - 15%, 800Vp D: 3 or 4-32VDC 15: 20AAC K: Screw K: Screw E: Contactor P: Overtemperature

RGC1B: IO 60: 600V +10% -15%, 1200Vp A: 20 - 275VAC, 24-190 VDC 20: 23AAC G: Box clamp G: Box Clamp protection

30: 30AAC M: Pluggable

40: 40AAC spring-loaded

60: 60AAC

90: 85AAC

2. Refer to derating curves

3. Default control connection for RGC...P is Box Clamp. See connections specifications.

Selection Guide (ZC= Zero Cross Switching, IO = Instant-On Switching, OTP= Over Temperature Protection )

Rated Output Blocking Connection Control Rated Operational Current @ 40˚C

Voltage Voltage Control/ Power Voltage 20 AAC 23 AAC 23AAC + OTP 30 AAC 30AAC + OTP

230VAC, ZC 800Vp Screw

/Screw 3 - 32VDC

RGC1A23D15KKE RGC1A23D20KKE RGC1A23D20GKEP RGC1A23D30KKE RGC1A23D30GKEP

Spring/Screw 3 - 32VDC RGC1A23D15MKE RGC1A23D20MKE - RGC1A23D30MKE -

Screw /Screw 20 - 275VAC, RGC1A23A15KKE RGC1A23A20KKE - RGC1A23A30KKE -

24 - 190VDC

Spring/Screw 20 - 275VAC, RGC1A23A15MKE RGC1A23A20MKE - RGC1A23A30MKE -

24 - 190VDC

600VAC, ZC 1200Vp Screw

/Screw 4 - 32VDC

RGC1A60D15KKE RGC1A60D20KKE RGC1A60D20GKEP RGC1A60D30KKE RGC1A60D30GKEP

Spring/Screw 4 - 32VDC RGC1A60D15MKE RGC1A60D20MKE - RGC1A60D30MKE -

Screw

/Screw 20 - 275VAC, RGC1A60A15KKE RGC1A60A20KKE RGC1A60A20GKEP RGC1A60A30KKE RGC1A60A30GKEP

24 - 190VDC

Spring/Screw 20 - 275VAC, RGC1A60A15MKE RGC1A60A20MKE - RGC1A60A30MKE -

24 - 190VDC

600VAC, IO 1200Vp Screw/Screw 4 - 32VDC RGC1B60D15KKE RGC1B60D20KKE - RGC1B60D30KKE -

4. DC control voltage range for RGC..D..P is 5 - 32VDC

Summary of content (20 pages)

PAGE 1
Solid State Relays Zero Switching Types RGC Solid State Contactor 'E' Connection • • • • • • • • • • • • Product Description This new range of solid state contactors presents a unique opportunity to maximize efficiency in panel space and is an evolution of solid state switches for which Carlo Gavazzi is very well known. The nominal current ratings are at 40˚C. The smallest width is 17.5mm and is rated at 20 AAC. Power and control teminals allow for safe looping of cables.
PAGE 2
RGC...
PAGE 3
RGC...E Output specifications (@ 25°C unless otherwise specified) Rated operational current AC-51 rating @ Ta=25°C AC-51 rating @ Ta=40°C AC-53a rating @ Ta=40°C Number of motor starts (x:6, Tx:6s, F:50%) at 40˚C 5 Min. operational current Rep. overload current (Motor Rating) PF = 0.4 - 0.5 UL508: TAMB=40°C, tON=1s, tOFF=9s, 50cycles Maximum transient surge current (ITSM) Maximum off-state leakage current I²t (10ms) Minimum Crititcal dv/dt (@ Tj init = 25°C) 6 RGC..15.. RGC..20.. RGC..30.. RGC..40..
PAGE 4
RGC...E Input specifications Control voltage range RGC..D..9 RGC..23.. 10 Pick-up voltage Drop-out voltage Maximum Reverse voltage Response time pick-up ZC (RGC1A..) RGC..A.. 3 - 32 VDC RGC..60.. 4 - 32 VDC RGC...P (Uc) 5 - 32 VDC RGC..23.. RGC..60.. RGC...P 3.0 VDC 3.8 VDC 5 VDC 1 VDC 32 VDC 20 - 275 VAC, 24 (-10%) - 190 VDC 20-275 VAC, 24 (-10%) - 190 VDC 20-275 VAC, 24 (-10%) - 190 VDC 20 VAC/DC 0.5 cycle + 500µs @ 24VDC Response time pick-up IO (RGC1B..
PAGE 5
RGC...E Input specifications (cont.) RG..D.. A1 Characteristics: DC input current vs Input voltage x 25.0mA RGC..D..P (Normal Operation) 20.0mA RGC..D..P (Active Protection) 15.0mA 10.0mA 5.0mA 2V 4V 6V 8V 10V 12V 14V 16V 18V 20V 22V 24V 26V 28V 30V 32V 34V x: Input currents for RGC1..D15, RGC1..D20, RGC1..D30, RGC1..D40, RGC1..D60 IN1 Characteristics: DC input current vs Input voltage 20.0mA y x RGC..D90GGEP (Normal Operation) 15.0mA 10.0mA 5.0mA RGC..D90GGEP (Active Protection) 0.
PAGE 6
RGC...E Motor Ratings: RGC..15 RGC..20 RGC..30 RGC..40 RGC..60 RGC..90GGEP HP (UL508) / kW (IEC60947-4-2) @ 40°C 115 VAC 230 VAC /3 HP / 0.18kW 1HP / 0.37kW ½HP / 0.18kW 1-½HP / 0.37kW 3/4HP / 0.37kW 2HP / 1.1kW 1HP / 0.56kW 3HP / 1.5kW 1-½HP / 0.56kW 3HP / 1.5kW 2HP / 0.75kW 5HP / 1.5kW 1 400 VAC 480 VAC 600 VAC 2HP / 0.75kW 2HP / 0.75kW 3HP / 1.5kW 5HP / 2.2kW 5HP / 3kW 7½HP / 4kW 3HP / 1.1kW 3HP / 1.1kW 5HP / 2.2kW 5HP / 3.7kW 7-½HP / 4kW 10HP / 4kW 3HP / 1.5kW 3HP / 1.5kW 5HP / 3.
PAGE 7
RGC...E Output Power Dissipation P ower dis s iaption in W C urrent 0 100W 1 2 390W 4 580W 6 7 870W 9 10 60W 11 12 50W 13 14 15 40W 16 17 30W 18 19 20 20W 21 22 10W 23 24 250W 0A 26 27 28 R G C 1x y y z…. load c urrent C W P 08 C W P 15R G C 1.. power C W P xdis 5 s ipation C Wvs P 25 C W P 30 R G C 1..20 R G C 1..30 R G C 1..30 R G H1..20 R G C 1..40 0.000 0.000 0.000 0.000 0.000 0.654 0.624 0.624 0.565 0.630 1.411 1.347 1.347 1.235 1.342 2.216 2.111 2.111 1.951 2.090 3.058 2.905 2.905 2.700 2.862 3.
PAGE 8
RGC...E Derating vs. Spacing Curves RGC.. 15.. Load Curre ent in AAC 25 20 15 10 0mm 5 5mm 0 0 10 20 30 40 50 60 70 80 10mm & over Surrounding Ambient Temperature in °C RGC.. 20.. Load Curre ent in AAC 35 30 25 20 0mm 15 5mm 10 10mm 5 20mm & over 0 0 10 20 30 40 50 60 70 80 Surrounding Ambient Temperature in °C RGC.. 30..
PAGE 9
Derating vs. Spacing Curves RGC.. 40.. 50 Load Current in AAC 45 40 35 30 0mm 25 10mm & over 20 Stand alone unit 15 10 0 10 20 30 40 50 60 Surrounding Ambient Temperature in °C 70 80 Load Curre ent in AAC RGC.. 60.. 70 65 60 55 50 0mm 45 40 10mm & over 35 Stand alone unit 30 0 10 20 30 40 50 60 70 80 Surrounding Ambient Temperature in °C RGC..
PAGE 10
RGC...E Agency Approvals and Conformances Conformance Agency Approvals UL508 Listed (E172877) cUL Listed (E172877) VDE 0660-109 GL12 Short Circuit Current Rating 100kA, UL508 IEC/EN 61000-6-2 Electrical Surge Immunity (for RGC...
PAGE 11
RGC...E Filtering - EN / IEC 55011 Class A compliance (for class B compliance contact us) Part Number Suggested filter for compliance Maximum Heater current RGC1A23..15 RGC1A23..20 RGC1A23..30 RGC1A23..
PAGE 12
RGC...E Connection Diagram (No OTP) AC Controlled A1 ~ 1 DC Controlled L1 A2 In AC controlled types only (RG..A..) a varistor is placed across A1/A2 terminals. 2 T1 In DC controlled types only (RG..D..) a diode is placed in series with the control circuit for protection against reverse biased connection. Connection Diagram (with OTP) RGC1...D20GKEP RGC1...D30GKEP RGC1...D40GGEP RGC1...D60GGEP Uc: 5 - 32 VDC Ua: max 35VDC Alarm Output: max. 50mA 12 RGC1...
PAGE 13
RGC...E Terminal Layout and Dimensions RGC...15KKE 17.8 9.5 5 98.5 51 35.5 43.8 106 98 90 3.2 RGC...15MKE 1 L1 109.5 17.8 5 L1 A2 T1 ON A2 45.5 35.5 3.2 43.8 A1 A1 106 98 90 RG Solid State Switch 9.5 92 2 T1 1/L1: Supply connection 2/T1: Load connection A1 (+): Positive control signal A2 (-): Control ground Specifications are subject to change without notice (30.06.2011) * Housing width tolerance +0.
PAGE 14
Terminal Layout and Dimensions (cont). RGC...20KKE 17.8 9.5 5 136 51 35.5 43.8 106 98 90 3.2 RGC...20MKE 1 L1 147 17.8 5 L1 A2 T1 ON A2 3.2 43.8 A1 A1 45.5 35.5 106 98 90 RG Solid State Switch 9.5 129.5 2 T1 17.8 RGC...30KKE 5 136 51 35.5 3.2 43.8 106 98 90 22.5 9.5 1/L1: Supply connection 2/T1: Load connection A1 (+): Positive control signal A2 (-): Control ground 14 * Housing width tolerance +0.
PAGE 15
RGC...E Terminal Layout and Dimensions (cont.) 147 22.5 RGC...30MKE 5 9.5 RG Solid State Switch 1 L1 A1 L1 A2 T1 3.2 ON A2 43.8 A1 129.5 2 T1 RGC...40KGE 136 35.6 27.2 5 51 43.7 L1 A2 T1 ON A2 A1 RGC...40MGE L1 R G S olid S tate S witc h 1 A1 43.8 A1 106 98 90 R G S olid S tate S witc h 3.2 A1 L1 A2 T1 ON A2 147 129.5 5 35.6 27.2 3.2 106 98 90 43.
PAGE 16
RGC...E Terminal Layout and Dimensions (cont.) 69.1 35.6 27.2 RGC...60KGE R G S olid S tate S witc h 51 43.7 A1 L1 A2 T1 136 5 3.2 106 98 90 ON A2 43.8 A1 22.5 17.8 9.5 RGC...20GKEP L1 1 163 78 ALARM ALARM 12 - SUPP SUPPL LY A1 RG Solid State Switch 106 98 90 11 + 5 35.5 CONTROL FAU AUL LT A2 GND RGC...30GKEP 2 T1 1 L1 35.5 ALARM ALARM 12 - 5 SUPPL SUPPLY A1 106 98 90 RG Solid State Switch 11 + 22.5 9.
PAGE 17
RGC...E Terminal Layout and Dimensions (cont.) 167.8 RGC...40GGEP 163 78 1212- A1 A1 IN2 IN3 A2 A2 35.6 27.2 43.7 106 98 90 60.5 11+ 11+ 5 RGC...60GGEP 163 78 5 43.7 121 2- A1 A 1 IIN2 N2 IIN3 N3 A 2 A2 106 98 90 11+ 11+ 69.1 27.2 RGC...90GGEP 163 5 78 43.7 ALARM CONTROL RG Solid State Switch OUT IN1 SUPPLY A1 11+ 11+ 121 2- A1 A1 IIN2 N2 IIN3 N3 A2 A2 69.1 27.2 CONTROL IN3 FAN + FAN - A2 GND GND RGC...D90GGEP 126 98 90 60.5 FAULT IN2 RGC...
PAGE 18
RGC...E Connection Specifications POWER CONNECTIONS: 1/L1, 2 /T1 Use 75°C copper (Cu) conductors Stripping Length (X) Connection type Rigid (Solid & Stranded) UL/ cUL rated data RGC..15.KE. ; RGC..20.KE. ; RGC..30.KE. RGC..40.GE. ; RGC..60.GE. ; RGC..90GGEP 12mm M4 screw with captivated washer 11mm M5 screw with box clamp X 1 x 2.5..6 mm2 2 x 2.5..6 mm2 2 x 14.. 10 AWG 1 x 14.. 10 AWG 2 x 1.0 ... 2.5mm2 2 x 2.5..4mm2 1 x 1.0..4mm2 2 x 18.. 14 AWG 1 x 18.. 12 AWG 2 x 14.. 12 AWG 2 x 1.0 ... 2.
PAGE 19
RGC...E Installation Instructions Y1 = 5mm X= X = Refer to product Derating vs. widthCurves Spacing Y2 = 100mm Short Circuit Protection Protection Co-ordination, Type 1 vs Type 2: Type 1 protection implies that after a short circuit, the device under test will no longer be in a functioning state. In type 2 co-ordination the device under test will still be functional after the short circuit. In both cases, however the short circuit has to be interrupted.
PAGE 20
RGC...E Protection with Miniature Circuit Breakers Solid State Relay type Model no. for Z - type M. C. B. (rated current) Model no. for B - type M. C. B. (rated current) Wire cross sectional area [mm2] Minimum length of Cu wire conductor [m]13 RGC..15, RGC..20 S201 - Z4 (4A) S201 - Z6 UC (6A) S201 - B2 (2A) S201 - B2 (2A) 1.0 1.0 1.5 21.0 21.0 31.5 RGC..30 S201 - Z10 (10A) S201-B4 (4A) 1.0 1.5 2.5 7.6 11.4 19.0 S201 - Z16 (16A) S201-B6 (6A) 1.0 1.5 2.5 4.0 5.2 7.8 13.0 20.