Datasheet

Solid state relay
Number of poles
Type of switching
Rated operational voltage
Control input
Rated operational current
Configuration layout
External supply
Options
Specifications are subject to change without notice (04.04.2016) 1
Product Description
Ordering Key
The RGC1P is a series of solid
state contactors (with integrat-
ed heatsink) that give the pos-
sibility to control output power
of 1-phase loads with an ana-
log control input. Input types
cover a wide range of current
and voltage ranges. Local set-
ting by an external potentiome-
ter is possible. Switching
modes, selectable through a
front knob, allow phase angle
control, full cycle control,
advanced full cycle control
specific for short wave infrared
heaters and soft starting for
limiting inrush current of loads
having a high temperature
coefficient.
The output of the RGC1P is
protected against overvoltages
by means of an integrated
varistor across the output. Two
front LEDs indicate the status
of the load and control.
Solid State Relays
1-Phase with Integrated Heatsink
Proportional Switching Controllers
Types RGC1P..AA.., RGC1P..V..
RGC 1 P 60 V 42 E D _
Specifications are at a surrounding temperature of 25°C unless
otherwise specified.
1: ‘V’ control input versions require an external supply Us
2: Refer to Current Derating
Type Selection
1-pole analog switching AC solid state contactors
Selectable mode of operation:
- Phase Angle
- Full Cycle x1, x4, x16
- Advanced Full Cycle
- Soft Starting
Rated operational voltage: up to 660 VAC
Rated operational current: up to 63 AAC
Control inputs: 4-20 mA, 0-5 V, 1-5 V, 0-10 V, external
potentiometer
Integrated varistor protection on output
Load ON LED indication
100kA short circuit current rating according to UL508
DIN or panel mount
SSR with
heatsink
Type of
switching
Rated voltage
(Ue), Blocking
voltage
Control
input
1
Rated current
2
@40°C, I²t
Connection
configuration
External Options
supply (Us)
RGC1:
1-pole
switching
P: Proportional 23: 85 - 265 VAC,
800 Vp
48: 190 - 550 VAC,
1200 Vp
60: 410 - 660 VAC,
1200 Vp
AA:
4-20 mADC
V:
0-5 VDC
1- 5 VDC
0-10 VDC
External
potentiometer
12: 15 AAC, 1,800 A²s
30: 30 AAC, 1,800 A²s
42: 43 AAC, 18,000 A²s
50: 50 AAC, 3,200 A²s
62: 63 AAC, 18,000 A²s
E: Contactor D: 24 VDC / AC T: Tamper proof
A: 90 - 250 VAC cover & securness
tie included in
packaging

Summary of content (23 pages)