Datasheet

ManualsBrandsCarlo Gavazzi ManualsRelaysSolid State Relay, 25A, 600V, Zero Cross Switching

Specifications are subject to change without notice (30.01.2018) 1

• Zero cross or Instant on switching AC solid state relay

• Rated operational voltage: up to 759 VAC

• Rated operational current: up to 90 AAC

• Up to 18000 A²s for I²t

• Control voltages: 3-32 VDC, 20-275 VAC (24-190 VDC)

• Design according to IEC/EN60947-4-2, IEC/EN60947-4-3,

IEC/EN62314, UL508, CSA22.2 No. 14-13

• Integrated voltage transient protection with varistor

• 100kA short circuit current rating according to UL508

• Option for DIN mounting (RGS...DIN)

1: 690 VAC version is CE marked only and does not have an integrated varistor

Product Description

Ordering Key

Aim of this solid state switching

device is to switch heater loads

and motor loads frequently.

The range offers solutions up

to 90 AAC in 17.5 mm width.

Output connections are via a

screw connection, having a

captivated washer allowing for

safe looping or via box clamp

which can handle cables up

to 25 mm

(AWG3). Input con-

nection is provided either via

a screw connection having a

captivated washer or via a

pluggable spring loaded input.

Options with integrated heat

sink are available in RGC

ranges. The RGS...DIN pro

vides an option for DIN mount-

ing of the RGS series with a

rating of 10 AAC @ 40˚C.

Solid state relay

Number of poles

Switching mode

Rated operational voltage

Control voltage

Rated operational current

Connection type for control

Connection type for power

Connection configuration

Option

Solid State Relays

Industrial, 1-Phase, 17.5mm with built-in varistor

‘E’ type connection

Types RGS..E, RGS..EDIN

RGS 1 A 60 D 90 K K E _

Ordering Key (refer to page 2 for available part numbers)

1Phase SSR Rated Control Rated current, Connection Connection Connection Options

with no heatsink voltage voltage Blocking voltage control power configuration

RGS1A: ZC* 23: 230 VAC D: 3 or 4-32 VDC 25: 25 A, 1200 Vp K: Screw K: Screw E: Contactor HT: Thermal

+10% - 15% A: 20 - 275 VAC, 50: 50 A, 1200 Vp M: Pluggable G: Box clamp

pad

RGS1B: IO** 60: 600 VAC 24-190 VDC 51: 50 A, 1600 Vp spring-loaded H51: Heatsink

+10% -15% 75: 75 A, 1200 Vp

RHS37A

69: 690 VAC 90: 90 A, 1200 Vp DIN: DIN rail

+10% -15% 91: 90 A, 1600 Vp

mount

92: 90 A, 1200 Vp, high I

t X40: Bulk

* ZC: Zero cross switching

packaging

**IO: Instant-On switching

of 40 pcs.

Specifications are at a surrounding temperature of 25°C unless otherwise specified.

Summary of content (19 pages)

PAGE 1
olid State Relays S Industrial, 1-Phase, 17.5mm with built-in varistor ‘E’ type connection Types RGS..E, RGS..EDIN Zero cross or Instant on switching AC solid state relay Rated operational voltage: up to 759 VAC1 Rated operational current: up to 90 AAC Up to 18000 A²s for I²t Control voltages: 3-32 VDC, 20-275 VAC (24-190 VDC) Design according to IEC/EN60947-4-2, IEC/EN60947-4-3, IEC/EN62314, UL508, CSA22.2 No.
PAGE 2
RGS..E, RGS..EDIN Selection Guide - RGS.. Max.
PAGE 3
RGS..E, RGS..EDIN Output Voltage Specifications Operational voltage range RGS..23.. 24-240 VAC, +10%, -15% on max RGS..60.. 42-600 VAC, +10% -15% on max RGS..69.. 42-690 VAC4, +10% -15% on max Blocking voltage 800Vp 275V - 1200 Vp 1600 Vp 625V 680V - 1600 Vp - - RGS..25/50/75/90/92 RGS..51/91 RGS..25/50/75/90/92 RGS..
PAGE 4
RGS..E, RGS..EDIN Motor Ratings6: RGS..25 HP (UL 508) / kW (EN/IEC 60947-4-2) @ 400C 115 VAC ½HP / 0.18kW RGS..50/51 1HP / 0.37kW 1½HP / 0.56kW RGS..75 RGS..90/91/92 2HP / 0.75kW 400 VAC 480 VAC 1½HP / 0.37kW 230 VAC 3HP / 0.75kW 3HP / 1.1kW 5HP / 1.5kW 600 VAC 690 VAC - / 1.5kW 3HP / 1.1kW 3HP / 1.5kW 5HP / 2.2kW 5HP / 1.5kW 5HP / 3kW 7½HP / 4kW 5HP / 2.2kW 7½HP / 4kW 10HP / 4kW 7½HP / 3.7kW 10HP / 4kW 15HP / 5.5kW - / 3.7kW - / 4kW - / 5.
PAGE 5
RGS..E, RGS..EDIN Derating Curves for RGS...DIN 13 Load Current in AAC 12 11 10 9 8 RGS..50KKEDIN, RGS..90KKEDIN RGS..50/90KKEDIN 7 RGS..25KKEDIN RGS..25KKEDIN 6 5 4 0 10 20 30 40 50 60 70 80 Surrounding Ambient Temperature in °C Derating vs. Spacing Curves for RGS...DIN Output Power Dissipation 100 90 Power dissipation in W 80 70 60 RGS..25 RGS..50 50 RGS..51 40 RGS..75 30 RGS..92 RGS..
PAGE 6
RGS..E, RGS..
PAGE 7
RGS..E, RGS..EDIN Filter Connection Diagram 3 Phase 1 Phase L1 SSR L2 SSR LOAD SSR L3 Rd Rd Rd Rd = 1MΩ, 0.5W N Filter has to be connected across both LOAD and SSR Terminal Layout and Dimensions RGS...KKE, RGS...KGE RGS..KKE 3.2 43.8 43.8 90 47.5 90 47.5 3.2 RGS ...MKE, RGS...MGE 51 43.7 17.8 51 35.5 17.8 RGS..KGE RGS..MKE RGS..MGE 62 2 43.7 3.2 43.8 T1 ON A2 3.2 17.8 90 47.5 A2 90 L1 43.8 A1 A1 62 44.5 35.5 17.8 L1 47.
PAGE 8
RGS..E, RGS..EDIN Terminal Layout and Dimensions (cont.) RGS....KKEDIN 17.8 51 35.5 17.8 51 43.7 17.8 51 35.5 17.8 51 43.7 3.2 43.8 43.8 43.8 43.8 90 47.5 3.2 90 47.5 3.2 90 47.5 90 47.5 3.2 RGS ....MKEDIN 2 1/L1: Supply connection 2/T1: Load connection A1 (+): Positive control signal A2 (-): Control ground 8 43.7 62 17.8 43.7 3.2 3.2 43.8 90 47.5 17.8 43.8 T1 ON A2 3.2 62 90 47.5 A2 3.2 43.8 A1 90 T1 L1 ON A2 47.5 A2 A1 47.5 L1 90 A1 A1 2 17.
PAGE 9
RGS..E, RGS..EDIN Connection Specifications 3.2 62 3.2 51 43.7 43.8 17.8 17.8 43.8 90 47.5 3.2 17.8 43.8 17.8 43.8 3.2 44.5 35.5 51 35.5 62 90 47.5 90 47.5 47.5 X X CONTROL CONNECTIONS: A1(+), A2(-) Use 60/75˚C copper (Cu) conductors RGS...KKE, RGS...KGE RGS...MKE, RGS...MGE Torque specifications M3, Pozidriv 1 UL: 0.5Nm (4.4lb-in) IEC: 0.5 - 0.6Nm (4.4 - 5.
PAGE 10
RGS..E, RGS..EDIN Agency Approvals and Conformance Conformance IEC/EN 62314 IEC/EN 60947-4-2 IEC/EN 60947-4-3 UL508 Recognised (E172877) CSA 22.2 No.14-13 (204075) VDE 0660-109 Short circuit current rating 100kA, UL508 Connection Diagram Functional Diagram DC control A1( +) Agency Approvals L1 L2/N * T1 REGULATION ZC IO A2( - ) L1 AC control +) A1( ~ Control input T1 REGULATION ZC A2(~- ) L1 Load Note: Varistor on output is not included in the RGS1A69...
PAGE 11
RGS..E, RGS..EDIN Heatsink Selection RGS1...5x RGS1...25 Load current [A] Load current [A] Thermal resistance [oC/W] Thermal resistance [oC/W] 25.0 3.11 2.72 2.33 1.94 1.55 1.17 0.78 25.7 50.0 1.45 1.28 1.06 0.87 0.68 0.49 0.30 52.8 22.5 3.55 3.10 2.66 2.22 1.77 1.33 0.89 22.6 45.0 1.72 1.50 1.29 1.07 0.85 0.64 0.42 46.3 20.0 4.10 3.59 3.08 2.56 2.05 1.54 1.03 19.5 40.0 2.00 1.75 1.50 1.25 1.00 0.75 0.50 40.0 17.5 4.83 4.23 3.63 3.02 2.42 1.
PAGE 12
RGS..E, RGS..EDIN Heatsink Selection for RGS...HT RGS1...5x..HT RGS1...25..HT Load current [A] Load current [A] Thermal resistance [oC/W] Thermal resistance [oC/W] 25.0 2.73 2.34 1.95 1.56 1.18 0.79 0.40 25.7 50.0 0.84 0.65 0.46 0.27 0.08 --- --- 52.8 22.5 3.30 2.86 2.42 1.97 1.53 1.09 0.64 22.6 45.0 1.12 0.90 0.69 0.47 0.25 0.04 --- 46.3 20.0 4.04 3.52 3.01 2.50 1.98 1.47 0.96 19.5 40.0 1.47 1.22 0.97 0.72 0.47 0.22 --- 40.0 17.5 4.83 4.23 3.
PAGE 13
Mounting Instructions Thermal stress will reduce the lifetime of the SSR. Therefore it is necessary to select the appropriate heatsinks, taking into account the surrounding temperature, load current and the duty cycle. Gradually tighten each screw (alternating between the two) until both are tightened with a torque of 0.75 Nm. Then tighten both screws to their final mounting torque of 1.5 Nm. A fine layer of thermally conductive silicone paste must be evenly applied to the back of the SSR.
PAGE 14
RGS..E, RGS..EDIN Short Circuit Protection Protection Co-ordination, Type 1 vs Type 2: Type 1 protection implies that after a short circuit, the device under test will no longer be in a functioning state. In type 2 co-ordination the device under test will still be functional after the short circuit. In both cases, however the short circuit has to be interrupted. The fuse between enclosure and supply shall not open. The door or cover of the enclosure shall not be blown open.
PAGE 15
RGS..E, RGS..EDIN Type 2 Protection with Miniature Circuit Breakers (M. C. B.s) Solid State Relay type ABB Model no. for Z - type M. C. B. (rated current) ABB Model no. for Wire cross B - type M. C. B. sectional area [mm2] (rated current) Minimum length of Cu wire conductor [m]12 RGS..25 (525 A2s) 1-pole S201 - Z4 (4A) S201 - B2 (2A) 1.0 21.0 S201 - Z6 UC (6A) S201 - B2 (2A) 1.0 21.0 1.5 31.5 RGS..50 1-pole RGS..51 S201 - Z10 (10A) S201-B4 (4A) 1.0 7.6 1.5 11.
PAGE 16
RG...P19 Environmental Information The declaration in this section is prepared in compliance with People’s Republic of China Electronic Industry Standard SJ/ T11364-2014: Marking for the Restricted Use of Hazardous Substances in Electronic and Electrical Products.
PAGE 17
RGS..E, RGS..EDIN Accessories RG DIN Clip Ordering Key DIN clip mounted to RGS RGS....DIN DIN clip accessory RGS1DIN This DIN Clip accessory can be mounted to any RGS model and will enable the RGS to be DIN rail mount. Minimum current rating @ 40˚C is 10 AAC. Refer to ‘Current Derating’ section . Gradually tighten the SSR, alternating between the 2 screws, to a maximum torque of 1.5Nm.
PAGE 18
RGS..E, RGS..EDIN Accessories (cont.) Heatsinks Ordering Key RHS.. RGS mounted on heatsink RGS..H.. Heatsink Range Overview: http://www.productselection.net/PDF/UK/ssr_accessories.pdf Heatsink Selector Tool: http://www.productselection.net/heatsink/heatsinkselector.php?LANG=UK Thermal Pads Ordering Key Thermal pad mounted on RGS RGS...HT Pack of 10 thermal pads size 34.
PAGE 19
RGS..E, RGS..EDIN Accessories (cont.) Screw Kits Ordering Key SRWKITM5X30MM - RGS Screw kit for mounting to heatsink - Torx T20, size M5 x 30 mm - Packing qty: 20 pcs Packaging Ordering Key RGS...X40 Bulk packaging of 40 pcs. RGS... Specifications are subject to change without notice (30.01.