Datasheet

ManualsBrandsCarlo Gavazzi ManualsRelaysSolid State Relay RP1A, SPST-NO, 10A, 265V, THT

Specifications are subject to change without notice (30.09.2005) 1

Solid State Relays

PCB 1-Phase ZS/IO

Types RP1A..D10, RP1B..D10

•AC Solid State Relay primarily for PCB mounting

•Zero switching or instant-on

•Rated operational current: 10 AACrms (25 AACrms with

forced air cooling)

•Rated operational voltage: Up to 600 VACrms

•Surface mount technology

•Flexible encapsulation for extended life

•Control voltage: 4 to 32 VDC*

•Opto-isolation: > 4000 VACrms

•Non-repetitive peak voltage: up to 1200 V

•Non-repetitive surge current: up to 250 A

Product Description

Ordering Key

Solid State Relay (PCB)

Number of poles

Switching mode

Rated operational voltage

Control voltage

Rated operational current

Rated operational Non-rep. voltage Control voltage Rated operational current

voltage 10 AACrms

230 VACrms 650 Vp 3-32 VDC RP1A23D10

400 VACrms 850 V

p 4-32 VDC RP1A40D10

480 VACrms 1000 V

RP1A48D10

600 VACrms 1200 V

p RP1A60D10

Switching mode Rated operational voltage Rated operational current Control voltage

A: Zero switching 23: 230 VACrms 10: 10 AACrms D: 4-32 VDC

B: Instant-On switching 40: 400 VACrms

48: 480 VACrms

60: 600 VACrms

* 3-32 VDC for RP1.23D10

Type Selection

Selection Guide

RP 1 A 60 D 10

The RP1..D10 is a SSR series

for socket or PCB-mounting,

providing an ideal interface

between logic controls and

AC loads. The RP1..D10 is

designed for resistive and

inductive load switching up to

600VACrms. The integral

heatsink allows switching of a

high current in this compact

package. Opto-isolation and

load switching are performed

by individual components,

providing higher reliability.

This relay can also drive high

AC53a loads up to 7 AACrms.

The Solid State technology

used can withstand peak volt-

ages of 1200V, making the

RP1..D10 series suitable to

drive AC loads such as loaded

induction motors.

RP1.23D10 RP1.40D10 RP1.48D10 RP1.60D10

Operational voltage range

RP1A 12-265 Vrms 20- 440 Vrms 20-530 Vrms 20-660 Vrms

RP1B 12-265 Vrms 12- 440 Vrms 12-530 Vrms 12-660 Vrms

Non-rep. peak voltage < 650 V

< 850 V

< 1000 V

< 1200 V

Rated insulation input to output 4 kVArms 4 kVArms 4 kVArms 4 kVArms

Operational frequency range 45 - 65 Hz 45 - 65 Hz 45 - 65 Hz 45 - 65 Hz

Power factor > 0.5 > 0.5 > 0.5 > 0.5

Zero voltage turn-on < 10 VACrms < 10 VACrms < 10 VACrms < 10 VACrms

Approvals UL, cUL UL, cUL UL, cUL UL, cUL

CE-marking Yes Yes Yes Yes

General Specifications

Summary of content (3 pages)

PAGE 1
Solid State Relays PCB 1-Phase ZS/IO Types RP1A..D10, RP1B..
PAGE 2
RP1...D10 Output Specifications Rated operational current AC51 @ Ta=25ºC AC53a @ Ta=25ºC Min. operational load current Rep. overload current t=1 s Non-rep. surge current t=20 ms Off-state leakage current @ rated voltage and frequency I2t for fusing t=10 ms Critical dI/dt @ 50 Hz Critical dV/dt off-state min. On-state voltage drop max.@ rated current RP1.23D10, RP1.40D10 RP1.48D10 RP1.60D10 10 AACrms 7 AACrms 10 mAACrms 16 AACrms 250 Ap < 3 mAACrms 340 A2s 50 A/µs 1000 V/µs < 1.
PAGE 3
RP1...D10 Dimensions Functional Diagram 11 M 3 REGULATION 2 9M ZC 18 mm 22 mm Control input IO 1 4 ZC - Zero Crossing IO - Instant On 3M 4M Applications 43 mm 22 mm If more than one relay is mounted, please allow a minimum distance of 20 mm in between for sufficient air cooling. 37 mm These relays can be used to switch heaters, motors, lights, valves or solenoids. M = 2.54 mm = 1/10 “ Specifications are subject to change without notice (30.09.