Installation Guide

www.carlon.com
13
Accessories
Std.
Part No. Size Ctn. Qty.
CC120B 8" 10
Std.
Part No. Size Ctn. Qty.
CC125 9" 12
Std.
Part No. Size Ctn. Qty.
CC122 17
1
/2" 1
Hand held cutter makes fast square, smooth
field cuts on conduit, sizes
1
/ 2 " through 1
1
/ 4 ".
Produces burr-free cut with no shavings.
Fits into pocket or pouch.
For clean cuts of conduit, sizes
1
/ 2 " through 2".
For fast, smooth field cuts of
1
/ 2 " through 1" Flex-Plus
®
Blue
™
ENT.
Small Cutter
Medium Cutter
Large Cutter
All-Weather ENT Blue
“Quick-Set” Solvent
Cement with brush*
Recommended for use
with Flex-Plus
®
Blue
™
ENT
(Electrical Nonmetallic
Tubing), Riser-Gard
®
,
P&C Flex
®
, and Carlon
PVC fittings.
Up through 4" diameter.
Recommended pipe
application and sizes
10˚-30˚F 4-5 minutes
30˚-50˚F 3-4 minutes
50˚-70˚F 1-2 minutes
70˚-90˚F
1
/ 2 -1
1
/ 2 minutes
2 hrs. 350 psi
16 hrs. 800 psi
72 hrs. 1,500 psi
Set-up time
(Evaporation Rate)
Lap Shear
@ 73˚F
Recommended
installation
temperature
4˚ to 100˚F
Viscosity at
75˚ as
manufactured
400-700 cps
Part Std.
No. Size Ctn. Qty.
VC9992 Quart 12
VC9993 Pint 24
Other tapes are available. Consult your sales service location for additional information.
Part. No. Size Tensile Strength Reel Lengths
TL14505
1
/2"12 50 lbs. 5,000 ft.
TL14510
1
/2" 1250 lbs. 10,000 ft.
TL38203
5
/8" 1800 lbs. 3,000 ft.
TL38265
5
/8" 1800 lbs. 6,500 ft.
TL38210
5
/8" 1800 lbs. 10,000 ft.
ENT cement required for use with ENT
PVC Conduit Cutters
Tape
Prelubricated, woven polyester tape made from low friction, high abrasion resistant yarns
providing a low coefficient of friction. Tape is printed with sequential footage markings for
accurate measurements.
Carlon
®
Cement
(MSDS sheets available at www.carlon.com)
*Meets ASTM D2564
Gross Automation [phone] · www.carlonsales.com · [e-mail]