Product Brochure

www.carlon.com

ENT CEMENT

Part No. Size Std. Ctn.

Qty.

VC9993 Pt. - Brush Top 24

VC9992 Qt. - Brush Top 12

See ENT cementing instructions below.

CONCRETE ENCASEMENT GUIDELINES

Carlon’s new quick connect one piece fittings are approved

for concrete-tight installations. For sizes larger than 1" the

use of standard Carlon solvent weld fittings with the proper

ENT Cement is recommended.

1. ENT should be tied to rebar at 2-3 foot intervals to

prevent flotation. Suitable materials include wire, tie

wraps, and tape.

2. When using UL solvent weld fittings for concrete tight

performance:

A. Do not use chemical primer or cleaner.

B. Apply a light, uniform coat of cement

labeled for use with ENT, on the coupling

and ENT.

C. Do not use a dauber.

D. Brush excess cement out of ENT grooves.

E. Promptly insert ENT into fitting while cement is wet,

until the stop is reached, and

give a quarter turn.

F. Do not disturb until joint is

set.

New snap in fittings do not

require taping. The threaded male adapter does not

require O-ring, only the snap in terminator requires the

flat washer.

3. Junctions box connections made with threaded male

terminal adapters may require the use of an O-ring to

make a water or concrete-tight connection.