User Manual

ManualsBrandsCarlon ManualsEquipmentAdjustable Low Voltage Floor Bracket Kit - Low Res

Adjustable Low Voltage

Floor Bracket Kit with Cover

THE FAST, EASY WAY TO PUT A LOW

VOLTAGE PORT ANYWHERE YOU NEED IT!

ADJUSTS TO MOST

FINISHED FLOOR HEIGHTS!

Kit includes:

• Nonmetallic or Brass Cover

• Adjustable Nonmetallic

Orange Floor Bracket

• Leviton QuickPort

Quad 106

Insert

•Metal Mounting Bracket(s)

• Mounting Screws

81UN

Floor Bracket

Assembled in USA

White Cover

SC100FBWC

Brass Cover

SC100FBBC

Ivory Cover

SC100FBVC

Gross Automation (877) 268-3700 · www.carlonsales.com · sales@grossautomation.com

Summary of content (4 pages)

PAGE 1
Adjustable Low Voltage Floor Bracket Kit with Cover THE FAST, EASY WAY TO PUT A LOW VOLTAGE PORT ANYWHERE YOU NEED IT! White Cover SC100FBWC Brass Cover SC100FBBC Ivory Cover SC100FBVC ADJUSTS TO MOST FINISHED FLOOR HEIGHTS! Kit includes: 81UN Floor Bracket • Nonmetallic or Brass Cover • Adjustable Nonmetallic Orange Floor Bracket • Leviton QuickPort® Quad 106® Insert • Metal Mounting Bracket(s) • Mounting Screws Assembled in USA omation (877) 268-3700 · www.carlonsales.
PAGE 2
INSTALLATION INSTRUCTIONS This low voltage floor bracket assembly is designed to be mounted on a joist or subfloor. It can be installed on the top of the joist or from the bottom if the thickness of the joist is sufficient to allow installation of the bracket. If the unit is to be installed from the bottom of the joist, check prior to installation to ensure there is sufficient adjustment remaining as this type of installation is non-standard. Install clip over subfloor.
PAGE 3
Installation – New Work Metal Bracket 1. The new work metal bracket may be installed on the floor joist below a 3/4 inch subfloor. When a thicker subfloor is used it is recommended cutting a hole in the subfloor, using the low voltage orange bracket as a template, and located adjacent to the joist so the mounting screws will engage the joist as well as the subfloor. Use the four (4) #6 X 1-3/4" long self-tapping screws supplied with the kit to mount the metal bracket. 2.
PAGE 4
25701 Science Park Drive Cleveland, Ohio 44122 www.carlon.