Specification

Thomas and Betts Corporation
Product Guide Specification
NON-METALLIC OUTLET BOXES
26 05 33.17-3
REVISION 0
C. Polycarbonate Non-metallic Outlet Boxes:
1. Non-metallic outlet boxes will be molded from Polycarbonate
2. Polycarbonate non-metallic outlet boxes shall not rust.
3. Polycarbonate non-metallic outlet boxes shall be provided with knockouts or cable clamps to
facilitate wiring.
4. Polycarbonate non-metallic outlet boxes shall be listed for use with masonry walls.
5. Polycarbonate non-metallic outlet boxes shall be UL classified for a 2 hour fire rating for walls
and ceilings.
6. Polycarbonate non-metallic outlet boxes shall be listed for use with 90 degree C conductors.
7. Polycarbonate non-metallic ceiling boxes shall be UL listed for fixture or fan support.
D. PVC Non-metallic Low Voltage Brackets:
1. Non-metallic brackets shall be molded from PVC.
2. PVC non-metallic brackets shall not rust.
3. PVC non-metallic brackets shall be provided without backs to facilitate cable bend radius
requirements.
4. PVC non-metallic Brackets shall be UL listed.
PART 3 – EXECUTION
3.01 INSTALLATION
A. Installation shall be in accordance with NEC Article 314 where applicable and any manufacturer’s
instructions.
END OF SECTION