Manualshelf

Specification

ManualsBrandsCarlon ManualsElectrical1 Gang Weatherproof Toggle Switch Cover - White (5-Pack per Case)
123
Thomas and Betts Corporation
Product Guide Specification
NON-METALLIC WEATHERPROOF COVERS
26 05 33.19-2
REVISION 0
B. Furnished products are recognized, listed or classified by third party agencies as suitable for the
intended purpose.
1.05 WARRANTY
A. Product is warranted free of defects in material and workmanship.
B. Product is warranted to perform the intended function within design limits.
PART 2 – PRODUCTS
2.01 GENERAL
A. Non-metallic weatherproof boxes covers will be UL listed and CSA certified or equivalent in
accordance with the applicable code.
2.02 MANUFACTURERS
A. Acceptable Manufacturers:
Thomas & Betts Corporation
8155 T&B Blvd
Memphis, TN 38125
800-816-7809, 901-252-5000
www.tnb.com
Product: Carlon® Weatherproof Covers
2.03 DESIGN AND PERFORMANCE REQUIREMENTS
A. Standard Non-metallic Weatherproof Covers:
1. Standard non-metallic weatherproof covers shall be molded from high Impact Polycarbonate
or PVC.
2. Standard non-metallic weatherproof boxes shall not rust.
3. Standard weatherproof covers shall be UV resistant – suitable for outdoor use.
4. Standard non-metallic weatherproof covers shall be UL Marine listed.
5. Standard non-metallic weatherproof covers shall mount to standard boxes or devices.
6. Standard non-metallic weatherproof covers shall fit all standard receptacles.
7. Standard non-metallic weatherproof covers shall be paintable.
B. In-Use Weatherproof Covers
1. In-use non-metallic weatherproof covers shall be molded from high Impact Polycarbonate.
2. In-use non-metallic weatherproof boxes shall not rust.
3. In-use weatherproof covers shall be UV resistant – suitable for outdoor use.
4. In-use covers shall be weatherproof while in use.
5. In-use weatherproof covers shall be rated NEMA Type 3R.
6. In-use weatherproof covers shall be lockable.
7. In-use weatherproof covers shall mount to standard boxes or devices.
8. In-use weatherproof covers shall mount either vertically or horizontally.
9. In-use weatherproof covers shall fit all standard receptacles.
10. In-use weatherproof covers shall be paintable.