Product Brochure

ManualsBrandsCarlon ManualsConduit Fittings1-1/2 in. PVC Service Entrance Cap (Case of 5)

F-43

Non-Metallic Rigid Conduit, Fittings and Accessories

Rigid Non-Metallic Conduit Fittings

(for use with Schedule 40 & 80 Conduit)

Standard Couplings

All socket fittings should be attached

using Carlon

solvent cement.

Couplings

SIZE STD. TYPICAL (IN.) I.D. O.D. TYPICAL (IN.)

CAT. NO.

(IN.) CTN. A B (IN.) (IN.) C L

E940D

⁄2 150 .852 .836 .728 1

⁄64

⁄16 1

⁄2

CE940DR-CTN

⁄2 75 .852 .836 .728 1

⁄64

⁄16 1

⁄2

E940E

⁄4 100 1.064 1.046 .840 1

⁄16

⁄4 1

⁄8

CE940ER-CTN

⁄4 45 1.064 1.046 .840 1

⁄16

⁄4 1

⁄8

E940F 1 50 1.330 1.310 1.210 1

⁄8

⁄16 2

CE940F-UPC 1 50 1.330 1.310 1.210 1

⁄8

⁄16 2

E940G 1

⁄4 30 1.677 1.655 1.535 1

⁄64 12

⁄8

E940H 1

⁄2 25 1.918 1.894 1.755 2

⁄64 1

⁄8 2

⁄8

E940J 2 30 2.393 2.369 2.190 2

⁄64 1

⁄16 2

⁄2

E940K 2

⁄2 20 2.890 2.868 2.688 3

⁄16 1

⁄64 3

⁄16

E940L 3 25 3.515 3.492 3.375 3

⁄32 1

⁄4 3

⁄32

E940M 3

⁄2 20 4.015 3.992 3.780 4

⁄16 1

⁄4 3

⁄8

E940N 4 15 4.515 4.491 4.265 5

⁄32 1

⁄32 3

⁄4

E940P 5 8 5.593 5.553 5.097 6

⁄4 1

⁄16 4

⁄16

E940R 6 5 6.658 6.614 6.115 7

⁄2 2

⁄16 4

⁄8

SIZE STD. STD. WT. LENGTH

CAT. NO.

(IN.) CTN. (LBS.) (IN.)

E941H 1

⁄2 40 9 3.19

E941J 2 25 8 3.59

E941K 2

⁄2 15 8 4.29

E941L 3 15 14 6.44

E941N 4 10 15 6.96

E941PF 5 4 12 9.63

E941RF 6 5 21 11.75

Expansion Fittings

COUPLING MALE TERMINAL

TRAVEL

END ADAPTER END

SIZE STD. LENGTH

CAT. NO. CAT. NO.

(IN.) CTN. (IN.)

E945D E945DX

⁄2 20 4

E945E E945EX

⁄4 15 4

E945F E945FX 1104

E945G E945GX 1

⁄4 54

E945H E945HX 1

⁄2 54

E945J E945JX 2158

E945K E945KX 2

⁄2 10 8

E945L E945LX 3108

E945M E945MX 3

⁄2 58

E945N E945NX 458

E945P E945PX 518

E945R E945RX 618

CAT. NO.

SIZE (IN.) STD. CTN.

E955D

⁄2 40

E955E

⁄4 40

E955F 125

E955G 1

⁄4 15

E955H 1

⁄2 10

E955J 26

Special

Long Line

Couplings

Long Line

Couplings

Socket type for

joining non-metallic

conduit.

E945 series expansion fittings are designed to compensate

for length changes due to temperature variations in exposed

conduit runs.

Short Expansion Couplings

Expand to a maximum of 2".

Male terminal

adapter end

Coupling end

Fabricated Expansion Couplings

• Exclusive molded-in mid-point indicator on the piston

• Exclusive 2" expansion fitting with an 8" travel distance

• Two-piece molded design with lubricated seals for easier

movement for the life of the product

• Ridges on the fitting for easier installation (sizes 2"–6" only)

• Male terminal adapter end design (

⁄2"–2" NPT Threads,

and 2

⁄2"–6" NPSC threads)

• Two O-rings to prevent leakage

• Can be installed vertically or horizontally

Canada only

SIZE STD. TRAVEL LENGTH

CAT. NO.

(IN.) CTN. (IN.)

E945KXL 2

⁄2 10 12

E23018

LR33856

E23018

Except

where

noted

Summary of content (17 pages)

PAGE 1
Rigid Non-Metallic Conduit Fittings (for use with Schedule 40 & 80 Conduit) Couplings Expansion Fittings E945 series expansion fittings are designed to compensate for length changes due to temperature variations in exposed conduit runs. E23018 Standard Couplings LR33856 E23018 Except where noted by All socket fittings should be attached using Carlon® solvent cement.
PAGE 2
Rigid Non-Metallic Conduit Fittings Non-Metallic Rigid Conduit, Fittings and Accessories (for use with Schedule 40 & 80 Conduit) Couplings Adapters Special Long Line Couplings — Sleeve Couplings Female Adapters E23018 Except where noted by Sleeve Coupling (For Repair Work) No Internal Stop CAT. NO. SIZE (IN.) STD. CTN. STD. WT. (LBS.) LENGTH (IN.
PAGE 3
Rigid Non-Metallic Conduit Fittings (for use with Schedule 40 & 80 Conduit) Plugs Adapters LR31146 Box Adapters for Enclosures Adapts non-metallic conduit to all electrical enclosures by inserting adapter through knockout and cementing into Carlon couplings. Reducer Plugs CAT. NO. E971C E971D E996D E996E E996F E996G E996H E996J E996K E996L E996N SIZE (IN.) STD. CTN. MIN OD (IN.) MAX CM (IN.) L (IN.) D (IN.) TYPICAL X (IN.
PAGE 4
Rigid Non-Metallic Conduit Fittings (for use with Schedule 40 & 80 Conduit) Caps Offsets Non-Metallic Rigid Conduit, Fittings and Accessories Service Entrance Caps E13938 SIZE CAT. NO. (IN.) E995G E995J 11⁄4 2 LR31146 STD. CTN. OFFSET (IN.) A (IN.) 15 8 0.758 0.684 4.230 4.270 Offset CAT. NO. E998D E998E E998E-CAR E998F E998F-CAR E998G-CAR E998H-CAR E998J-CAR E998K-UPC E998L E998N SIZE (IN.) STD. CTN. E ⁄2 3 ⁄4 3 ⁄4 1 1 11⁄4 11⁄2 2 21⁄2 3 4 5 20 5 15 5 5 5 5 2 2 2 1.76 1.76 1.76 2.
PAGE 5
Rigid Non-Metallic Conduit Accessories, Conduit Bodies Washers Sleeves Flat Sealing Washer HOLFORM™ Concrete Sleeves Where a waterproof termination is required into any enclosure (metallic or non-metallic), install the neoprene washer over the threads of a terminal adapter before inserting into the enclosure. Use a standard locknut or threaded bushing to secure the assembly. HOLFORM™ non-metallic concrete sleeve forms are the easy way to form holes in concrete.
PAGE 6
Conduit Bodies Feature unthreaded hubs and textured lids with foam-in-place gaskets. Conduit Bodies LR31146 Non-Metallic Rigid Conduit, Fittings and Accessories Type LB Type LR SIZE CAT. NO. (IN.) E986D E986E E986F E986G E986H E986J E986K E986L E986M E986N STD. TYPICAL MAX. CTN. C L1 ⁄2 3 ⁄4 1 11⁄4 11⁄2 2 21⁄2 3 31⁄2 4 25 15 10 10 10 10 4 4 4 4 1 ⁄16 29 ⁄32 29 ⁄32 13⁄32 13⁄32 15⁄32 15⁄8 15⁄8 125⁄32 125⁄32 45⁄16 69⁄32 69⁄32 731⁄32 731⁄32 931⁄32 147⁄8 147⁄8 1723⁄32 1723⁄32 11 DIMENSIONS (IN.
PAGE 7
Junction Boxes Molded Non-Metallic Junction Boxes — 6P Rated Type 6P enclosures are intended for indoor or outdoor use, primarily to provide a degree of protection against contact with enclosed equipment, falling dirt, hose-directed water, entry of water during prolonged submersion at a limited depth and external ice formation.
PAGE 8
Non-Metallic Rigid Conduit, Fittings and Accessories Junction Boxes Large PVC Junction Boxes/ NEMA 4X Large PVC Junction Boxes are fabricated from Type II PVC sheet. Reduce the use of steel boxes and keep your wiring connections clean, safe and dry using these high-quality, fully gasketed junction boxes.
PAGE 9
Switch Boxes Single-Gang FS Boxes LR31146 Where noted by Type FSS • For dead-end terminations • For multiple dead-end circuit terminations or where additional support is required in stub-up applications • All sizes take standard covers and accessories or devices • All sizes take standard covers and accessories or devices • Integral mounting feet provide easy mounting • Detachable mounting feet provide easy mounting CAT. NO.
PAGE 10
Switch Boxes Non-Metallic Rigid Conduit, Fittings and Accessories Single-Gang FD Deep Device Boxes Type FDC • For terminations where hub requirements vary according to application — hubs easily made with flared wood bit or hole saw • For through terminations where large devices or additional wiring capacity is required • All sizes take standard covers and accessories or devices • All sizes take standard covers and accessories or devices • Integral mounting feet provide easy mounting • Integral mount
PAGE 11
Switch Boxes Two-Gang FS Boxes Type 2FSC LR31146 Where noted by Type 2FSE E11461 • All sizes take standard covers and accessories or devices • All sizes take standard covers and accessories or devices • Integral mounting feet provide easy mounting • Integral mounting feet provide easy mounting CAT. NO. CAT. NO. E9812D CE9812D-CTN E9812E CE9812E-CTN E9812F C9812F SIZE (IN.) VOL. CU. IN. STD. CTN. ⁄2 ⁄2 3 ⁄4 3 ⁄4 1 1 32 32 32 32 32 32 10 10 10 10 10 10 1 1 Canada Only SIZE (IN.) VOL. CU. IN.
PAGE 12
Support Straps Non-Metallic Rigid Conduit, Fittings and Accessories Snap Strap™ Conduit Support Straps Carlon’s Snap Strap™ offers a unique support strap designed especially for the installation of PVC conduit. Also usable for installations of rigid steel. This high-strength, non-metallic clamp enables conduit to expand and contract freely, eliminating the bowing commonly seen from the expansion and contraction of conduit caused by varying temperature changes.
PAGE 13
Clamps Non-Metallic Clamps Non-metallic clamps offer the same chemical resistance as Carlon® non-metallic conduits for a complete, corrosion-resistant system. To be used in accordance with conduit spacing requirements per the NEC®, Section 352.30 and 12-1114 of the CEC. • UV inhibited for use in direct sunlight Conduit Clamps CAT. NO. E977DC E977EC E977FC E977GC E977HC E977JC E977KC-CAR E977LC-CAR E977NC-CAR SIZE IN.
PAGE 14
Non-Metallic Rigid Conduit, Fittings and Accessories Clamps Carlon® Masonry Pipe Clamps Carlon® Masonry Pipe Clamps make installations faster and easier by eliminating the use of bolts and anchors. The one-piece design features an anchoring projection designed to push into a 5⁄16" drill hole. The clamps are used to securely support pipe/conduit and electrical cables on concrete and masonry block, and unlike metallic clamps Carlon® Masonry Clamps won’t rust or corrode.
PAGE 15
Technical Specifications Corrosion Resistance of Carlon® Schedule 40 and Schedule 80 Fittings Carlon Schedule 40 and Schedule 80 Fittings are generally acceptable for use in environments containing the chemicals below. These environmentalresistance ratings are based upon tests where the specimens were placed in complete submergence in the reagent listed.
PAGE 16
Rigid Non-Metallic Utility Conduit Non-Metallic Rigid Conduit, Fittings and Accessories Deep-Socket Schedule 40 Utility Elbows with Integral Belled Ends F-58 SEGMENT CAT. NO. NOM. DIA. (IN.) 90° SWEEP UC9BHB UC9DHB UC9FHB UC9BJB UC9DJB UC9FJB UC9HJB UC9DKB UC9FKB UC9DLB UC9FLB UC9DNB UC9FNB UC9HNB UC9FRB UC9HRB 11⁄2 11⁄2 11⁄2 2 2 2 2 21⁄2 21⁄2 3 3 4 4 4 6 6 RADIUS (IN.) STD. CTN. STD. WT. (LBS.) 12 24 36 12 24 36 48 24 36 24 36 24 36 48 36 48 20 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 25.00 2.13 3.
PAGE 17
Rigid Non-Metallic Long Belled Utility Conduit Non-UL Listed CAT. NO. 90° ELBOW UC9CJBLB UC9DJBLB UC9DLBLB UC9DNBLB UC9DPBLB UC9FJBLB UC9FLBLB UC9FNBLB UC9FPBLB UC9FRBLB UC9HJBLB UC9HLBLB UC9HNBLB UC9HPBLB UC9HRBLB RADIUS (IN.) STD. CTN. STD. WT. (LBS.) 2 2 3 4 5 2 3 4 5 6 2 3 4 5 6 18 24 24 24 24 36 36 36 36 36 48 48 48 48 48 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1.3 1.4 5.0 5.8 8.5 2.2 5.2 7.8 11.1 9.6 2.8 12.0 9.7 13.7 18.1 SEGMENT CAT. NO.