Product Description User Manual

ManualsBrandsCarlon ManualsEquipmentMulti-Gard PVC

MULTI-GARD

PVC RACEWAY

www.carlonsales.com

MultiGard PVC is a multi-cell raceway system for direct burial and concrete

encasement applications. 20' lay length sections of 4" PVC outer shell Type

C, Type 40, or Type 80 have either 3 x 1-1/2" or 4 x 1-1/4" nominal prelubed

PVC innerducts preinstalled.

In addition, all fixed and patented flexible bends utilize "cutthrough"

resistant engineered plastic innerducts" Many other accessories for

terminating, pulling cable, jetting cable, and directional boring are

available.

Features:

• Prelubricated innerducts provide very low coefficient of friction for easy

pulls, and PVC innerducts expand and contract at the same rate as

outerduct.

• Anti-reversing gaskets on coupling body allow for easy joining. Eliminates

need for cementing joints except in boring or jetting applications.

• Jettable using high speed air blowing systems.

• O-ring gasket at base of bell reduces risk of water entering system.

• Inward tapering holes on coupling body give quick and easy innerduct

alignment.

• Print line on outer duct states "Install Print Line Up" to keep system

straight during installation.

• Marked innerduct and marked hole on coupling body ensure proper

innerduct alignment and allow crews to work from opposite directions.

• Terminators for standard, pullthrough, and jetthrough applications.

• Standard and slip sleeve couplings for field cuts and repairs.

• Field repair kit for outershell and innerducts allows repair without taking

cable out of service.

• Transition adaptors allow transition between different outerducts.

• 6" deep bell provides strong joint for field bends.

• Internal spacers maintain straight innerduct path.

• End caps are provided on each 20 ft" section.

• Staging materials to job site is simplified.

• Patented flexible bends allow changes in direction.

Multi-Gard Type C and Type 40 are U.L. listed

Gross Automation (877) 268-3700 · www.carlonsales.com · sales@grossautomation.com

Summary of content (9 pages)

PAGE 1
MULTI-GARD® PVC RACEWAY MultiGard PVC is a multi-cell raceway system for direct burial and concrete encasement applications. 20' lay length sections of 4" PVC outer shell Type C, Type 40, or Type 80 have either 3 x 1-1/2" or 4 x 1-1/4" nominal prelubed PVC innerducts preinstalled. In addition, all fixed and patented flexible bends utilize "cutthrough" resistant engineered plastic innerducts" Many other accessories for terminating, pulling cable, jetting cable, and directional boring are available.
PAGE 2
MULTI-GARD® PVC RACEWAY Part Numbers 20' Lay Length Sections PVC Multi-Cell With Bell Part No. MXSS4S020 MXSS35020 MFSS4S020 MFSS3S020 MDSS4S020 MDSS3S020 Bell (A) Outerduct (B) Innerduct O.D. Innerduct I.D. Pkg. Wt. per/100 Dim. Dim. Dim Dim. Qty. (lbs.) 4-Cell Type C 4.67 4.35 1.31 1.19 1060' 245 3-Cell Type C 4.67 4.35 1.66 1.50 1060' 256 5.00 4.50 1.31 1.19 960' 338 5.00 4.50 1.66 1.50 960' 348 5.50 4.75 1.31 1.19 760' 450 5.50 4.75 1.66 1.
PAGE 3
MULTI-GARD® PVC RACEWAY PVC Multi-Cell Fixed Bends With Bell Multi-Gard fixed bends use the same coupling design as straight sections. All bends are provided with engineered plastic innerducts to avoid rope cut-through. Part No. Description Pkg. Qty. Wt. ea. M _ _ _ N4S 4-cell Fixed Bend 1.19 I.D. * * M _ _ _ N35 3-cell Fixed Bend 1.50 I.D. * * Product Outerduct Degree(A) Radius (R) Cells Pos. 2 Pos. 3 Pos. 4 Pos. 5 Pos.
PAGE 4
MULTI-GARD® PVC RACEWAY PVC Multi-Cell Flexible Bends With Bell Multi-Gard flexible bends use a patented design capable of a 4' minimum bend radius and use the same coupling design as straight sections and fixed bends. All bends are provided with engineered plastic innerducts to avoid rope cutthrough. Part No. Description Pkg. Qty. Wt. ea. M _ F _ 4 _ 4-cell Flexible Bend 1.19 I.D. * * M _ _ _ N35 3-cell Flexible Bend 1.50 I.D. * * Product Pos. 1 Outerduct Degree and Radius (R) Pos. 3 Pos. 2 Pos.
PAGE 5
MULTI-GARD® PVC RACEWAY Accessories Terminators PVC Multi-Cell Termination kits allow for sealing inner and outerducts. Each kit contains innerduct sealing plugs with rope tie. Standard terminators allow for end terminations, and passs-through (jet-through) terminators allow for bridging innerducts across a vault to allow for unassisted pulling (or jetting) of cable through the vault. Box terminators allow end terminations into aboveground cabinets. Part No. 4-Cell Part No. 3-Cell Description Pkg. Qty. Wt.
PAGE 6
MULTI-GARD® PVC RACEWAY Couplings PVC Multi-Cell Couplings are provided in standard sleeve for joining two uninstalled plain ends and slip couplings for male/male connections and repair of unoccupied MultiGard. Part No. 4-Cell M _ CC4 M _ SC4 Pos.1 Part No. 3-Cell Description Pkg. Qty. Wt. ea. M _ CC3 Standard Sleeve Coupling * * M _ SC3 Slip Coupling * * Pos. 2 Pos. 3 Pos. 4 Pos.
PAGE 7
MULTI-GARD® PVC RACEWAY Transition Adaptors Transition adaptors allow different outerducts to be coupled together while maintaining same innerduct. Part No. Description Pkg. Qty. Wt. ea. M _ A _ _ Transition Adapters * * Product Pos.1 Outerduct Pos. 2 Pos. 3 Outerduct Pos. 4 Cells Pos. 5 E = EMT R = Galv. Steel X = Type C B = F/G BR 3 = 3-Cell M = Multi-Cell F = Type 40 A = Adapter H = F/G HW 4 = 4-Cell D = Type 80 S = F/G Std. F = Type 40 PVC D = Type 80 PVC www.carlonsales.
PAGE 8
MULTI-GARD® PVC RACEWAY Repair Kits Multi-Gard PVC 10' Repair kits allow for Multi-Gard repair without disrupting a live cable Part No. Description Pkg. Qty. Wt. ea. M _ R _ 4 4-Cell 10 ft. Repair - Cable installed * * M _ R _ 3 3-Cell 10 ft. Repair - Cable installed * * Product Pos.1 M = Multi-Cell Outerduct Pos. 2 Pos. 3 No. of Cables Cells Pos. 4 Pos. 5 X = Type C R = Repair F = Type 40 1 = 1 Cable 2 = 2 Cables 3 = 3 Cables 4 = 4 Cables 3 = 3-Cell 4 = 4-Cell Pkg. Qty. and Wt. ea. www.
PAGE 9
MULTI-GARD® PVC RACEWAY Drop Kit for Multi-Gard PVC Drop kit allows Multi-Gard with cable installed to be lowered for newly installed utilities in a minimum distance using Carlon split-duct. Greatly reduces the cost in time and manpower especially if concrete encasing afterward. Part No. Description Pkg. Qty. Wt. ea. M _ D _ _ 010 Drop Kit for lowering 1 * Product Pos. 1 Outerduct Pos. 2 Description Pos. 3 Type Pos. 4 Cells Pos.