Use and Care Guide

United States
Tel: [phone]
800.816.7809
Fax: [phone]
Technical Services
Tel: [phone]
www.tnb.com
E-475
Conduit & Fittings — Carlon
®
PVC Elbows, Conduit & Fittings
No waste • Sprays on in seconds • Fast setting
Multi-Purpose Spray-On Low-VOC PVC Cements
• Equivalent to a medium-bodied low-VOC,
quick-setting clear cement
• No more spills
• Reuse can until empty
• Installation: 50° to 80° F; Storage: 35° to 120° F
• Meets ASTM D-2564
• Three-year shelf life
• One 4-oz. can is equivalent to 4 oz. of non-aerosol
PVC cement*
• All cements are low VOC
* Equivalence is subject to usage and will vary.
Applications:
• For use up to 4" diameter
Schedule 40 or 80 PVC
electrical conduit
• For use with PVC raceways
only. Not recommended for
use on water, sewer, natural
gas, compressed gas or
air connections
Meets ASTM D-2564
TEMPERATURE
RANGE
RECOMMENDED SET TIME
PIPE SIZES
1
⁄2" TO 1
1
⁄4" PIPE SIZES 1
1
⁄2" TO 2" PIPE SIZES 2
1
⁄2" TO 4"
60°–100° F 2 min. 5 min. 30 min.
40°–60° F 5 min. 10 min. 2 hrs.
0°–40° F 10 min. 15 min. 12 hrs.
Low VOC — Gray
CAT. NO. SIZE APPLICATOR DESCRIPTION
STD.
CTN.
STD. WT.
(LBS.)
VC9LV4-24 Half Pint Dauber Low VOC Gray 24 15.5
VC9LV3 Pint Dauber Low VOC Gray 24 27.0
VC9LV2 Quart Dauber Low VOC Gray 12 26.0
CAT. NO. SIZE DESCRIPTION
STD.
CTN.
STD. WT.
(LBS.)
VC9AC5 4 oz. PVC Spray-On Medium Clear 12 5.6
VC9AC5C 4 oz. PVC Spray-On Medium Clear 12 5.6
VC9AC16 11 oz. PVC Spray-On Medium Clear 12 12.3
VC9AC16C 11 oz. PVC Spray-On Medium Clear 12 12.3
Recommended set time may vary depending on humidity.
Canada only
RECOMMENDED PIPE
APPLICATION AND SIZES
SET-UP TIME
(EVAPORATION RATE)
RECOMMENDED
INSTALLATION TEMP
LAP SHEAR
@ 73° F
VISCOSITY AT 75° F
AS MANUFACTURED
Recommended for all grades
and types of Carlon
®
wireway
and fittings, except Flex-Plus
®
Blue
™
ENT (Electrical Non-
Metallic Tubing).
Up through 6" diameter.
VOC emission of 490 grams/liter per
the Bay and South Coast test method.
10°–30° F Not recommended 40° to 100° F 2 hrs. 350 psi 500–900 cps
30°–50° F 5–6 minutes 16 hrs. 800 psi
50°–70° F 3–4 minutes 72 hrs. 1,500 psi
70°–90° F 1–2 minutes
Elbows, Sweeps and Accessories