Use and Care Guide

United States
Tel: [phone]
800.816.7809
Fax: [phone]
Technical Services
Tel: [phone]
www.tnb.com
E-513
Conduit & Fittings — Carlon
®
PVC Elbows, Conduit & Fittings
Carflex
®
Omni
Connectors — 90° Angle
Features:
• Available in sizes
3
⁄8" through 1" conduit and
tubing
• All-nylon construction resists saltwater,
weak acids, gasoline, alcohol, oil, grease
and common solvents
• No disassembly required
• No threading of the conduit or tubing
required to install
• Complete conduit/connector system
is reusable
• Suitable for indoor/outdoor use
• Lower installed cost
• Black connectors provided with nylon
locknut
• Gray connectors provided with assembled
O-ring and metal locknuts
• Protection class IP 68 per DIN 40050
up to 70 psi (5 bar) water pressure
• Molded of type 6/6 nylon. ASTM D-4066-PA
111; flammability classification 94V-2
Features:
• Available in sizes
3
⁄8"
through 1" conduit and tubing
• Smooth internal surfaces for easier wire
installation around corner angles
• All-nylon construction resists saltwater,
weak acids, gasoline, alcohol, oil, grease
and common solvents
• No disassembly required
• No threading of the conduit or tubing
required to install
• Complete conduit/connector system
is reusable
• Use of a sealing washer may be required
for wet locations
• Suitable for indoor/outdoor use
• Lower installed cost
• Black connectors provided with nylon
locknut, packed separately
• Gray connectors provided with assembled
O-ring and metal locknuts.
• Protection class IP 68 per DIN 40050
up to 70 psi (5 bar) water pressure
• Molded of type 6/6 nylon. ASTM D-4066-PA
111; flammability classification 94V-2
CAT. NO.
BLACK
CAT. NO.
GRAY*
SIZE
(IN.) DESCRIPTION
BODY & SEALING UNIT LOCKING NUT
STD.
CTN.
A C D E F G H
CLEARANCE
HOLE
IN. (MM)
MAX O.A.
LENGTH
IN. (MM)
THREAD
LENGTH
IN. (MM)
WRENCHING
NUT THICKNESS
IN. (MM)
WRENCHING
FLATS
IN. (MM)
THICKNESS
IN. (MM)
WRENCHING
FLATS
IN. (MM)
LT38 LT38G
3
⁄8 Straight L/T Fitting .875 (22.2) 2.000 (50.8) .625 (15.9) .250 (6.3) 1.328 (33.7) .266 (6.7) 1.062 (26.9) 50
LT50 LT50G
1
⁄2 Straight L/T Fitting .875 (22.2) 2.000 (50.8) .625 (15.9) .250 (6.3) 1.328 (33.7) .266 (6.7) 1.062 (26.9) 50
LT75 LT75G
3
⁄4 Straight L/T Fitting 1.109 (28.2) 2.031 (51.6) .625 (15.9) .250 (6.3) 1.562 (39.7) .266 (6.7) 1.312 (33.3) 25
LT100 LT100G 1 Straight L/T Fitting 1.375 (34.9) 2.250 (57.1) .781 (19.8) .250 (6.3) 1.875 (47.6) .266 (6.7) 1.625 (41.3) 20
* Gray connectors provided with assembled O-ring and metal locknuts. Black connectors provided with nylon locknuts only.
3
⁄8" to
3
⁄4"
CAT. NO.
BLACK
CAT. NO.
GRAY
SIZE
(IN.) DESCRIPTION
BODY & SEALING UNIT LOCKING NUT
STD.
CTN.
A B C D G H
CLEARANCE
HOLE
IN. (MM)
MAX O.A.
HEIGHT
IN. (MM)
MAX O.A.
LENGTH
IN. (MM)
THREAD
LENGTH
IN. (MM)
THICKNESS
IN. (MM)
WRENCHING
FLATS
IN. (MM)
LT938 LT938G
3
⁄8 90 Degree L/T Fitting .875 (22.2) 1.98 (50.3) 2.91 (73.9) .52 (13.2) .27 (6.8) 1.06 (26.9) 25
LT950 LT950G
1
⁄2 90 Degree L/T Fitting .875 (22.2) 1.98 (50.3) 2.91 (73.9) .52 (13.2) .27 (6.8) 1.06 (26.9) 25
LT975 LT975G
3
⁄4 90 Degree L/T Fitting 1.109 (28.2) 2.29 (58.2) 3.17 (80.5) .52 (13.2) .27 (6.8) 1.31 (33.3) 20
LT9100 LT9100G 1 90 Degree L/T Fitting 1.375 (34.9) 2.84 (72.1) 3.18 (80.8) .78 (19.8) .27 (6.8) 1.61 (40.9) 10
Domed
Sealing Nut
Suggested Clearance
Hole for Non-Threaded
Mounting
A
Suggested
Clearance Hole
for Non-Threaded
Mounting
A
C
G
H
G
H
Domed
Sealing Nut
Optional
Sealing Washer
C
D
F
E
B
D
Optional
Sealing
Washer
E23018
LR201397
E23018
LR201397
Carflex
®
Omni Connectors — Straight
Domed
Sealing Nut
Optional
Sealing
Washer
C
B
D
G
H
1"
Carflex
®
Liquidtight Flexible Conduit and Fittings