Specification Sheet



Carl’sPlaceLLC|www.carlofet.com|[e-mail]

Carl’s White Rear Projection Film, Finished Edge Projector Screen
with Grommets
Carl's Place is the internet's leading DIY resource for quality projector screen material, finished edge
screens and kits at a great low price!
This White Finished Edge Rear Projection Film Screen is the perfect surface to use when the
situation does not allow projection equipment to be in front of the screen. The finished edges with
grommets make it easy to install on any truss system, DIY frame or Carl’s Kit. The semi-translucent
white surface works best with a bright projector (2,000+ lumens) and wider viewing angle/audience
seating area. This semi-translucent white material offers fewer chances for hotspots and a better
front-projected/ dual-sided projection image, if versatility is needed. White Rear Projection Film
Material is best when stretched tightly and evenly in all four directions (like a drum). Your DIY White
Rear Projection Film Screen is a high-tech product which features a natural and clear image and
works best in a dark setting where ambient light is controlled. You should project onto the smooth
side of your White Rear Projection Film. Why buy White Rear Projection Film? It's a great way to
hide your projection equipment; you need a wider viewing angle and/or the versatility to project
from both the front and the back of your screen!
 White Rear Projection Screen Material with Finished Edges & Grommets Installed
 Great with any truss system or your DIY frame (View 4-inch Rule on Page 3)
 Semi-Translucent white so the image passes through the material when the projection
equipment is behind the screen
 White Rear Projection Film is a high-tech 100% PVC product with a natural & clear image
 Great for a wider viewing angle/audience seating area and fewer chances for hotspots
 Better front-projected/dual-sided projection image, if versatility is needed
 White Rear projection fabric works best with a bright projector (2,000+ lumens)
 Best in a dark environment where ambient light is controlled
 Indoor/Outdoor applications (Mildew Resistant)/Portable
 Tension-Mount/Stretch for best results (tight like an artist canvas)
 The textured side faces the audience
 Gain— Not Applicable
 Shipping Weight/Dimensions next page
Finished Edge Projector Screens ship folded and cannot ship rolled. Remove your screen from
the box immediately upon receipt. Once installed and the proper tension has been applied
evenly all the way around the screen, the folds pull out nicely. Fold marks can be a good
indicator you have applied the proper amount of tension during installation. To store your
screen; make sure it is clean and dry and always fold it loosely, do not roll a finished edge
screen or you risk imprinting the screen with each grommet hole each time around the tube.